Male coupling with crimped hose nozzle System Perrot
Product information "Male coupling with crimped hose nozzle System Perrot"
| Material: | steel, galvanized |
|---|
| NW | for hose (mm) | Material | Product Number | Delivery Time | |
|---|---|---|---|---|---|
| 50 | 50 | steel, galvanized | 2415050050 | ||
| 70 | 65 | steel, galvanized | 2415070065 | ||
| 70 | 70 | steel, galvanized | 2415070070 | ||
| 70 | 75 | steel, galvanized | 2415070075 | ||
| 89 | 76 | steel, galvanized | 2415089076 | ||
| 89 | 80 | steel, galvanized | 2415089080 | ||
| 89 | 90 | steel, galvanized | 2415089090 | ||
| 108 | 76 | steel, galvanized | 2415108076 | ||
| 108 | 80 | steel, galvanized | 2415108080 | ||
| 108 | 90 | steel, galvanized | 2415108090 | ||
| 108 | 102 | steel, galvanized | 2415108102 | ||
| 108 | 110 | steel, galvanized | 2415108110 | ||
| 133 | 102 | steel, galvanized | 2415133102 | ||
| 133 | 127 | steel, galvanized | 2415133127 | ||
| 133 | 133 | steel, galvanized | 2415133133 | ||
| 159 | 50 | steel, galvanized | 2415159050 | ||
| 159 | 76 | steel, galvanized | 2415159076 | ||
| 159 | 102 | steel, galvanized | 2415159102 | ||
| 159 | 110 | steel, galvanized | 2415159110 | ||
| 159 | 127 | steel, galvanized | 2415159127 | ||
| 159 | 152 | steel, galvanized | 2415159152 | ||
| 159 | 159 | steel, galvanized | 2415159159 | ||
| 216 | 152 | steel, galvanized | 2415216152 | ||
| 216 | 200 | steel, galvanized | 2415216200 |
Product data sheet
Skip product gallery
COBI Tension jaw clamps W1
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
MASTER-1521
Maßtabelle Kupplungensystem Perrot
Das Kupplungensystem Perrot besteht aus einem M-Teil (Mutterteil) und einem V-Teil (Vaterteil). Das M-Teil besteht aus einem Becherteil mit einem Gummiring und einem hinter dem Becherteil befindlichen beweglichen Ring mit aufgesetztem Hebelwerk. Das Hebelwerk greift hinter den Pilzkopf des V-Teils, um dieses mit dem M-Teil fest zu verbinden. Durch die pilzförmige Bauweise lassen sich M- und V-Teil um bis zu 15° geneigt zusammenkuppeln. Um die exakte Größe der Kupplungen zu bestimmen, werden bei dem M-Teil der Innendurchmesser und bei dem V-Teil der Außendurchmesser gemessen.
NW
A (mm)
B (mm)
50 / 2"
75,0
75,0
70 / 2 1/2"
98,0
102,5
89 / 3"
130,0
134,0
108 / 4"
145,5
155,5
133 / 5"
171,5
179,0
159 / 6"
203,5
211,0
216 / 8"
287,0
312,5
Product number:
Perrot
Skip product gallery
COBIAQUA KU - PE-potable water hose
Inner-Ø (mm):
13
|
Length (m):
50
COBIAQUA KU - PE potable water hose made of soft polyethylene, highly flexible, designed for conveying drinking water as a supply hose for mobile dispensing systems, festivals, fairs, and events. Ideally designed for flexible drinking water supply. The drinking water hose complies with the KTW recommendation of the German Federal Environment Agency (UBA guideline) and the DVGW worksheet W270. Additionally suitable for the food industry, beverage industry, alcoholic liquids, dairy products, and vegetable oils.
Product number:
1009013000
Male coupling with crimped hose nozzle System Perrot
NW:
108
|
for hose (mm):
110
Product number:
2415108110
Male coupling with crimped hose nozzle System Perrot
NW:
159
|
for hose (mm):
127
Product number:
2415159127
DVGW-PP flange connection
DN:
65
|
d:
75
one side screw connection with flange
Product number:
4612075065
Brass sleeve ball valve type COBI with butterfly handle
Female thread:
3/8"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3050010000
PVC pressure pipe
wall thickness (mm):
2,4
|
d:
50
with one bonding socket
Product number:
4000050024
Three-way ball valve
Female thread:
3/4"
all sides female thread
for not aggressive media, with L-rotary plug valve
Product number:
3060019000
Hydraulic cylinder doubel acting
addition2:
8"
for slurry gate valves 4"- 6"
Product number:
8051200200
COBIKANTEX 250 - Rubber sewer cleaning hose 250 bar
Inner-Ø (mm):
32
|
Length (m):
160
lightweight, high flexible and extremely abrasion-resistant rubber sewer cleaning hose. The light weight and low bending radius allow extremely easy handling. The external cover is smooth and very resistant to abrasion and to oil and weathering effects. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1481032160
Double nipple for compressed air couplings
Male thread:
2 x Rd 38 x 1/8"
for compressed air and water
Product number:
2211038000
Female coupling as blind cap type DC - System Kamlok stainless steel
NW:
3/4"
with stainless steel lever
Product number:
2178019000
Pipe coupling elbow 90° with female thread
d:
50
one side female thread, other side screw connection
Product number:
3457050038
COBIFOOD STAR SP - Milk handling hose
Inner-Ø (mm):
38
|
Length (m):
40
for liquid, fatty and non-fatty foods such as wine, beer, milk, juice, alcohol up to 96%. Equipment of unloading stations, stationary processing and filling plants, silo vehicles and as a milk collection hose.
Product number:
1120038000
PP screw connection
Male thread:
2"
|
d:
90
one side screw connection, other side male thread
Product number:
4651090050
PE T-piece 90° reduced SDR 11
d:
280 x 225
with reduced middle outlet, PE 100 SDR 11 / 10 bar gas / 16 bar water
Product number:
4738280225
Male coupling with crimped hose nozzle System Perrot
NW:
50
|
for hose (mm):
50
Product number:
2415050050
Tip
COBIDRUCK - Rubber spiral suction and pressure hose 10 bar
Inner-Ø (mm):
19
|
Length (m):
40
suitable for agriculture, construction trade and industry. Suitable for water, waste water, sewage and low concentrated alkalis and acids. Robust and kink resistant rubber suction and pressure hose.
Product number:
1050019000
Stainless steel fixed coupling with male thread System Storz
NW:
52-C
|
Male thread:
1 1/2"
Product number:
2108052038
Brass sleeve ball valve type COBI with butterfly handle
female thread / male thread:
3/8"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3055010000
High pressure spray gun with long throw lance ST-2320
addition2:
inlet 1/2" FT
flow rate 80 l/min, long throw lance 850 mm with coating, handle and nozzle protection, without nozzle
Product number:
6286013003
DVGW-PP coupling, reduced
d:
40 x 32
one side screw connection, other side reduced screw connection
Product number:
4603040032
MZ brass lever gate valve ART. 0030
Female thread:
2 1/2"
both sides female thread
Product number:
3207063000
COBIQUICK Clamping flange with rotated hose nozzle
NW:
4"
|
for hose (mm):
80
with rubber ring in the flange surface
Product number:
2551100080
COBISUPERFLEX - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
51
|
Length (m):
50
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality.
Product number:
1083051000
COBIAIR - PVC compressed air hose
Inner-Ø (mm):
5
|
Length (m):
50
fabric hose suitable for air, water and food, conditional oil-and chemical-resistant. Suitable for hydraulic systems with low pressure.
Product number:
1201005000
MZ-two- and three-way flange cock with hydraulic cylinder
DN:
200
with brass rotary plug valve and hydraulic cylinder, housed lubricator nipple and gaskets
Product number:
8460200180
Brass bibcock ball valve
Male thread:
1"
with hose screw connection, useable for not aggressive media
Product number:
3090025000
COBIINDIWA - Rubber industrial water hose 10 bar
Inner-Ø (mm):
76
|
Length (m):
Abschnitt
suitable for water, waste water, sewage and low concentrated alkalis and acids. For applications in agriculture, construction and industry. Robust and buckling stabilized pressure hose.
Product number:
1051076000abs
Malleable cast iron T-fitting 90° reduced no. 130
Female thread:
3/4" x 1" x 3/4"
all sides female thread with reduced middle outlet
Product number:
3717019025
Female coupling with smooth hose nozzle System Perrot
NW:
108
|
for hose (mm):
100
with safety collar for shell-inclusion
Product number:
2414108100
Brass sleeve ball valve type COBI
female thread / male thread:
1/4"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3045006000
Wall elbow 90° with female thread
d:
32
one side female thread, other side screw connection and 3-point fixing
Product number:
3460032025
Brass bibcock ball valve
Male thread:
1/2"
with hose screw connection, useable for not aggressive media
Product number:
3090013000
Female coupling as blind cap type DC - System Kamlok stainless steel
NW:
2"
with stainless steel lever
Product number:
2178050000
PE T-piece 90° reduced SDR 11
d:
160 x 110
with reduced middle outlet, PE 100 SDR 11 / 10 bar gas / 16 bar water
Product number:
4738160110
High pressure nozzle Variation nozzle
addition2:
15 l/min
from point to flat stream
Product number:
6095006000
Male coupling with male thread type F - System Kamlok stainless steel
NW:
1 1/4"
Product number:
2176032000
Stainless steel suction coupling with hose nozzle System Storz
NW:
125
|
for hose (mm):
125
Product number:
2106125125
COBIAIR CLEAR - PVC hose, crystal clear
Inner Ø x Outer Ø:
16 x 20 mm
|
Length (m):
50
1-layer soft PVC hose for non-pressurized conveying of air, water, liquid foodstuffs, fruit juices, beverages, and for use in the medical sector. Partially oil- and chemical-resistant. Suitable for low-pressure hydraulic systems and also suitable as a protective hose.
Product number:
1205016002
Brass foot valve type Europe
Female thread:
2 1/2"
with female thread, spring loaded with niro suction basket, plate in stainless steel
Product number:
3246063000
Skip product gallery
COBI Tension jaw clamps W1
Clamping range (mm):
113-121
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521113121
Female coupling with crimped hose nozzle System Perrot
NW:
159
|
for hose (mm):
110
Product number:
2410159110
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
110
|
Length (m):
Abschnitt
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082110000abs
TW clamping ring with lever made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
80
for connecting the sealing ring piece with the curve piece
Product number:
2003080000
Lever set, heavy model
addition2:
4"-6"
for mounting on slurry gate valve. Especially for small spaces.
Product number:
8012150001
TW sealing ring piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
80 x 3" IG
with female thread
Product number:
2002080000
Alu suction coupling with hose nozzle Type I System Storz
NW:
110-A
|
for hose (mm):
110
Product number:
2113110110
