Brass hose connection with male coupling
Product information "Brass hose connection with male coupling"
for clamp-inclusion, corrugated hose connection with male thread
Material: | brass |
---|
Skip product gallery
COBI Tension jaw clamps W1
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
MASTER-1521
Hose clamp two part M 2
two part wide-band clamp to clamping range 60-70 mm screw M6 x 45 from clamping range 65-75 mm screw M8 x 60
Product number:
MASTER-1540
Skip product gallery
Malleable cast iron Reducing nipple no. 241
male thread / female thread:
3/8" x 1/4"
one side male thread, other side female thread
Product number:
3724010006
Half screw fitting assortment for COBIKANTEX
NW:
25
Screw socket and cone packing with union nut
Product number:
2986025000
Pipe double nipple no. 23 galvanized
Male thread:
1/4"
|
length (mm):
80
both sides male thread according to DIN 2982
Product number:
3750006080
PVC adaptor union
d:
90
injection moulding, pipe-male thread bonding socket x male thread
Product number:
4437090075
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
110
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270110000
Malleable cast iron Reducing double nipple no. 245
Male thread:
1" x 3/4"
both sides male thread
Product number:
3725025019
Pipe double nipple no. 23 galvanized
Male thread:
1 1/2"
|
length (mm):
200
both sides male thread according to DIN 2982
Product number:
3750038200
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
50
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329050000
Brass hose connection with male coupling
for hose (mm) x male thread:
38 x 2“ mt
for shell-inclusion, smooth hose connection with safety collar and male thread
Product number:
2053050038
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
60
both sides male thread according to DIN 2982
Product number:
3750013060
Brass hose connection with male coupling
for hose (mm) x male thread:
38 x 1 1/2“ mt
for clamp-inclusion, corrugated hose connection with male thread
Product number:
2051038038
COBIORPU - Light weight Polyurethane exhaust ventilation hose
Inner-Ø (mm):
110
|
Length (m):
Abschnitt
suitable for powder, grain mixture, wood shaving, dust, isolating materials, grass and deciduous exhaust ventilation, food and chemicals. Very moveable and abrasion-proof PU hose for light applications. Microbes and hydrolysis resistant.
Product number:
1333110000abs
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
80
both sides male thread according to DIN 2982
Product number:
3750013080
COBISINTEC PU - Synthetic construction and industry hose 14 bar
Inner-Ø (mm):
52-C
|
Length (m):
20
for high demand water transport. High abrasion-proof all weather flat hose with PU coating on the outside. Assembled with aluminium couplings system Storz.
Product number:
1041052020
Stainless steel fixed coupling with female thread System Storz
NW:
52-C
|
Female thread:
2"
Product number:
2107052050
PVC socket with male thread
Male thread:
1/2"
|
d:
25 x 32
bonding connection/bonding socket x male thread
Product number:
4310025013
Brass hose connection with male coupling
for hose (mm) x male thread:
50 x 2“ mt
for shell-inclusion, smooth hose connection with safety collar and male thread
Product number:
2053050050
Suction lance for COBIHIVAC with PVC ball valve
NW:
2"
for suction of faecal from portable toilets suitable for COBIHIVAC. Suction lance made of PVC ball vave with PP male coupling 2“ system Kamlok, PP-compression fitting and PVC-pipe 1 m length
Product number:
65501
PVC Threaded socket (Typ COBI)
Female thread:
3/8"
without reinforcement ring 2 x female thread
Product number:
4355010000
PVC threaded socket
Female thread:
1/4" x 1/2"
2 x female thread without reinforcement ring
Product number:
4301006013
Brass hose connection with male coupling
for hose (mm) x male thread:
100 x 4“ mt
for clamp-inclusion, corrugated hose connection with male thread
Product number:
2051100100
Pipe double nipple no. 23 galvanized
Male thread:
1 1/4"
|
length (mm):
100
both sides male thread according to DIN 2982
Product number:
3750032100
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
100
both sides male thread according to DIN 2982
Product number:
3750013100
Tension jaw clamps W2
Clamping range (mm):
43-47
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1525043047
Pipe double nipple no. 23 galvanized
Male thread:
1"
|
length (mm):
60
both sides male thread according to DIN 2982
Product number:
3750025060
PVC threaded socket
Female thread:
1/2" x 3/4"
2 x female thread without reinforcement ring
Product number:
4301013019
Aluminium 90° elbow with one side rotatable Storz coupling and the other side fixed Storz coupling
NW:
110-A
Product number:
2150110090
COBISINTEC 13 - Synthetic construction and industry hose 13 bar
Inner-Ø (mm):
75-B
|
Length (m):
20
suitable as construction site hose and for water duct. All-weather flat hose, rot-proof, abrasion-resistant and durable. Assembled with aluminium couplings system Storz with long tail.
Product number:
1040075020
Brass double nipple
Male thread:
3/8"
both sides male thread, flat sealing
Product number:
3360010000
Malleable cast iron Reducing nipple no. 241
male thread / female thread:
2 1/2" x 1 1/2"
one side male thread, other side female thread
Product number:
3724063038
COBIORPU - Light weight Polyurethane exhaust ventilation hose
Inner-Ø (mm):
55
|
Length (m):
Abschnitt
suitable for powder, grain mixture, wood shaving, dust, isolating materials, grass and deciduous exhaust ventilation, food and chemicals. Very moveable and abrasion-proof PU hose for light applications. Microbes and hydrolysis resistant.
Product number:
1333055000abs
Female coupling with male thread System Perrot
NW:
89
|
Male thread:
2 1/2"
Product number:
2420089063
Rubber ring for female coupling italian coupling system
NW:
80
|
wall thickness (mm):
11
Product number:
8313080000
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
203
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270203000
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
305
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270305000
Skip product gallery
TW clamping ring with lever made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
80
for connecting the sealing ring piece with the curve piece
Product number:
2003080000
TW curve piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
80 x 3" IG
with female thread
Product number:
2001080000
TW sealing ring piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
80 x 3" IG
with female thread
Product number:
2002080000
TW clamping ring with lever made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
50
for connecting the sealing ring piece with the curve piece
Product number:
2003050000
TW sealing ring piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
50 x 2" IG
with female thread
Product number:
2002050000
Tension jaw clamps W4
Clamping range (mm):
85-91
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1531085091
Alu clamping shells EN 14420-3
for hose x wall thickness (mm):
80 x 8
for inclusion of couplings with smooth hose connections and safety collar, two-part, complete with hexagon socket screw and nut
Product number:
2070080008
Glycerin-filled manometer 63 mm housing, connection 1/4" male thread bottom
indicating range (bar):
0/+40
Bourdon tube pressure gauge for liquid and gaseous media, filled with glycerin.
Product number:
8128006040
Brass sleeve ball valve type COBI
Female thread:
3/4"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3030019000