Brass sleeve ball valve for gas
Product information "Brass sleeve ball valve for gas"
| Ball: | brass hard chromium-plated |
|---|---|
| Casing: | brass nickel plated |
| Gasket: | PTFE |
| Handle: | aluminium, yellow |
| Temperature range: | -20°C up to +60°C |
| Female thread | Packing unit (piece) | thread length (mm) | weight (g) | overall length (mm) | bore (mm) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|---|---|
| 1/2" | 10/100 | 25 | 280 | 61 | 15 | 3037013000 | ||
| 3/4" | 8/104 | 31 | 440 | 68 | 20 | 3037019000 | ||
| 1" | 6/48 | 38 | 620 | 85 | 25 | 3037025000 | ||
| 1 1/4" | 4/32 | 47 | 980 | 99,5 | 32 | 3037032000 | ||
| 1 1/2" | 2/24 | 54 | 1380 | 109 | 40 | 3037038000 | ||
| 2" | 2/14 | 66 | 2100 | 130 | 50 | 3037050000 |
Last Seen
all sides female thread with reduced middle outlet
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
without air injection cooling and with gear - broached shaft left-hand turning
two part, loose tongues and backupclaws.
very flexible hose made of two layers of fiberglass, silicone coated, suitable for exhaust industrial ventilation, automotive and plastic industry.
2 x male thread
for the vacuum cleaner in the industry and the mechanical engineering. In the ventilation and the construction drying. Also suitable to the suction cleaning of welding smoke without flying sparks.
both sides male thread according to DIN 2982
