COBILIGHT SE - High-flexible PVC suction and pressure hose
Product information "COBILIGHT SE - High-flexible PVC suction and pressure hose"
specially as a drip hose for liquid manure distribution. Super flexible and cold-resistant quality. UV and weather resistant.
| Colour: | green transparent |
|---|---|
| Structure: | synthetic spiral hose, green transparent, inside smooth with embedded white hard PVC spiral, outside light corrugated |
| Temperature range: | -25°C up to +60°C |
| Inner-Ø (mm) | Length (m) | Unit | Vacuum (m WC) | bending radius (mm) | WP (bar) | weight (g) | wall thickness (mm) | Outer-Ø (mm) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 38 | 50 | meter | 7 | 150 | 5 | 580 | 3,4 | 44,8 | 1061038000 | ||
| 40 | 50 | meter | 7 | 160 | 4,5 | 610 | 3,8 | 47,6 | 1061040000 | ||
| 50 | 50 | meter | 7 | 200 | 3,5 | 810 | 4,1 | 58,2 | 1061050000 |
Product data sheet
Skip product gallery
Brass hose connection with male coupling
for hose (mm) x male thread:
50 x 2“ mt
for clamp-inclusion, corrugated hose connection with male thread
Product number:
2051050050
Alu suction coupling with hose nozzle System Storz
NW:
52-C
|
for hose (mm):
50
Product number:
2103052050
Tension jaw clamps W4
Clamping range (mm):
56-59
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1531056059
Hose clamp two part M 2
Clamping range (mm):
50-60
two part wide-band clamp to clamping range 60-70 mm screw M6 x 45 from clamping range 65-75 mm screw M8 x 60
Product number:
1540050060
COBI Tension jaw clamps W1
Clamping range (mm):
56-59
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521056059
Skip product gallery
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
200
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329200000abs
DVGW-PP screw connection
Male thread:
1 1/4"
|
d:
32
one side screw connection, other side male thread
Product number:
4601032032
Female coupling with hose connection type C - System Kamlok PP
NW:
1"
with stainless steel lever
Product number:
2151025000
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
38
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258038000
DVGW-PP screw connection
Female thread:
4"
|
d:
90
one side screw connection, other side female thread
Product number:
4602090100
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
120
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258120000
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
63
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258063000
COBIPUR S - Heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
40
|
Length (m):
10
suitable for sharp-edged media, granulates, gravel, sand, glass. Especially suitable for suction dredgers. Special model for heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals. Absolutely seamless and smooth inner wall, optimal flow characteristics.
Product number:
1330040000
COBIPUR S - Heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
152
|
Length (m):
5
suitable for sharp-edged media, granulates, gravel, sand, glass. Especially suitable for suction dredgers. Special model for heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals. Absolutely seamless and smooth inner wall, optimal flow characteristics.
Product number:
1330152005
Brass quick coupling with blind plug for potable water
knag distance (mm):
40
Product number:
3604000000
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
180
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258180000
Brass sleeve ball valve type industry
Female thread:
2"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3031050000
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
70
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258070000
DVGW-PP screw connection
Male thread:
1 1/2"
|
d:
63
one side screw connection, other side male thread
Product number:
4601063038
Butterfly valve PN 10/16
DN:
50
Cast iron adapter flange valve with raster handle
Product number:
3071050000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
200
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329200000
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
110
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258110000
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
140
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258140000
DVGW-PP screw connection
Male thread:
1/2"
|
d:
25
one side screw connection, other side male thread
Product number:
4601025013
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
25,2
|
Length (m):
80
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485025080
COBIKANTEX 250 - Rubber sewer cleaning hose 250 bar
Inner-Ø (mm):
32
|
Length (m):
80
lightweight, high flexible and extremely abrasion-resistant rubber sewer cleaning hose. The light weight and low bending radius allow extremely easy handling. The external cover is smooth and very resistant to abrasion and to oil and weathering effects. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1481032080
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
25,2
|
Length (m):
150
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485025150
DVGW-PP screw connection
Male thread:
4"
|
d:
110
one side screw connection, other side male thread
Product number:
4601110100
DVGW-PP screw connection
Female thread:
1 1/4"
|
d:
63
one side screw connection, other side female thread
Product number:
4602063032
COBIWATER PREMIUM 20 - High-flexible EPDM-multipurpose hose 20 bar
Inner-Ø (mm):
19
|
Length (m):
40
for air, cold and hot water and light-chemical media with low aggressiveness. Aging and weather resistant.
Product number:
1004019000
DVGW-PP screw connection
Male thread:
3"
|
d:
75
one side screw connection, other side male thread
Product number:
4601075075
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
32,5
|
Length (m):
240
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485032240
Tip
COBIDRUCK - Rubber spiral suction and pressure hose 10 bar
Inner-Ø (mm):
19
|
Length (m):
40
suitable for agriculture, construction trade and industry. Suitable for water, waste water, sewage and low concentrated alkalis and acids. Robust and kink resistant rubber suction and pressure hose.
Product number:
1050019000
Mortar male coupling with hose nozzle and safety collar
NW:
25 360° drehbar
for hydraulical pressing
Product number:
2198025141
Brass sleeve ball valve for potable water
Female thread:
3/4"
both sides female thread
with full bore, useable for potable water according to DIN EN 13828 and DVGW-W 570
Product number:
3038019000
Alu double hose nozzle for clamping rings System Storz
for hose (mm):
101,5
Product number:
2142101000
Mortar male coupling with hose nozzle and safety collar
NW:
50
for hydraulical pressing
Product number:
2198050050
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
152
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329152000
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
203
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258203000
DVGW-PP screw connection
Male thread:
3/4"
|
d:
20
one side screw connection, other side male thread
Product number:
4601020019
DVGW-PP screw connection
Male thread:
2"
|
d:
63
one side screw connection, other side male thread
Product number:
4601063050
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
32,5
|
Length (m):
180
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485032180
COBIAQUA PU FLAT - Potable flat hose with Storz Couplings
Inner-Ø (mm):
52-C
|
Length (m):
10
High-quality flat drinking water hose, ideally suited for potable water supply applications, e.g. as a drinking water transfer hose or emergency supply hose. The drinking water hose is fully fitted with Storz system couplings. The connectors are made of brass, and the lugs are made of aluminium. Equipped with blue, drinking-water-approved seals and stainless steel wire binding. Features: - Suitable for use in drinking water supply - Resistant to oil, petrol, and chemicals - Ageing, ozone, and UV resistant - Robust design for professional use
Product number:
1020052010
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
40
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258040000
Mortar male coupling with hose nozzle and safety collar
NW:
35
for hydraulical pressing
Product number:
2198035035
DVGW-PP screw connection
Male thread:
1"
|
d:
40
one side screw connection, other side male thread
Product number:
4601040025
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
13
|
Length (m):
150
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485013150
COBISUPERELASTIC - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
63
|
Length (m):
Abschnitt
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality. Outer cover particularly protected against abrasion by increased external spiral.
Product number:
1086063000abs
DVGW-PP screw connection
Male thread:
1 1/2"
|
d:
32
one side screw connection, other side male thread
Product number:
4601032038
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
13
|
Length (m):
180
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485013180
COBIPUR P1 - Light polyurethane exhaust ventilation hose
Inner-Ø (mm):
50
|
Length (m):
10
exhaust ventilation and transport of abrasive, granulate figured media. Microbes and hydrolysis resistant.
Product number:
1258050000
COBIKANTEX 250 - Rubber sewer cleaning hose 250 bar
Inner-Ø (mm):
32
|
Length (m):
200
lightweight, high flexible and extremely abrasion-resistant rubber sewer cleaning hose. The light weight and low bending radius allow extremely easy handling. The external cover is smooth and very resistant to abrasion and to oil and weathering effects. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1481032200
Skip product gallery
Stainless steel hexagon double nipple
Male thread:
1/2"
both sides male thread
Product number:
5025013000
Tangit special cement
addition2:
tin 250 g
for PVC-U (hard). Surfaces must be cleaned with cleaner before bonding!
Product number:
4095000250
Stainless steel screw union
Female thread:
3/4"
both sides female thread, conical sealing
Product number:
5095019000
Stainless steel full socket
Female thread:
3/4"
both sides female thread DIN 2986
Product number:
5000019000
