COBILIGHT SE - Highly flexible PVC suction and pressure hose, drag hose
Product information "COBILIGHT SE - Highly flexible PVC suction and pressure hose, drag hose"
| Colour: | green transparent |
|---|---|
| Structure: | synthetic spiral hose, green transparent, inside smooth with embedded white hard PVC spiral, outside light corrugated |
| Temperature range: | -25°C up to +60°C |
| Inner-Ø (mm) | Length (m) | Unit | WP (bar) | bending radius (mm) | wall thickness (mm) | weight (g) | Outer-Ø (mm) | Vacuum (m WC) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 38 | 50 | meter | 5 | 150 | 3,4 | 580 | 44,8 | 7 | 1061038000 | ||
| 40 | 50 | meter | 4,5 | 160 | 3,8 | 610 | 47,6 | 7 | 1061040000 | ||
| 50 | 50 | meter | 3,5 | 200 | 4,1 | 810 | 58,2 | 7 | 1061050000 |
Product data sheet
Passendes Zubehör
for clamp-inclusion, corrugated hose connection with male thread
Fire department coupling made of aluminium according to the Storz system with hose nozzle. Suitable for water supply in fire departments, THW, industry, construction and agricultural engineering. Meets the highest requirements for reliability and pressure resistance.
wide-band clamp with open able bridge piece and with rounded clamp band edges
two part wide-band clamp to clamping range 60-70 mm screw M6 x 45 from clamping range 65-75 mm screw M8 x 60
Hinged bolt clamp (spanning jaw clamp) with rounded clamp band edges, reliably preventing damage to hoses and sealing materials. Specifically developed for use at high pressures. The hex bolt is screwed with full bolts, ensuring optimal force distribution and secure fastening.
Last Seen
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
both sides female thread, metallic sealing
for clamp-inclusion, corrugated hose connection with male thread
three-part with screw and nut
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality.
for milk tankers. For unloading of milk in dairies and stationary filling equipment. Also for transport of other liquid foodstuffs such as wine, beer, cider, fruit juice, vinegar and alcohol up to 96%.
Antistatic, medium-heavy ether-polyurethane suction hose with a reinforced stainless steel spiral (INOX AISI 302), highly flexible. Thanks to food-contact approval according to EU 10/2011 and FDA CFR 21-177.2600, this hose is ideally suited as a food hose or pharmaceutical hose for applications in the food, pharmaceutical, and plastics industries – especially for the suction of granulates and highly abrasive media. The COBIPUR M ETHER stands out for its very high abrasion resistance, its resistance to microbes and hydrolysis, and its excellent resistance to mineral oils, chemicals, UV radiation, ozone, and weathering. Despite its robustness, it is lightweight and extremely flexible even at low temperatures. Thanks to the completely smooth interior, excellent flow properties are achieved, while the constant wall thickness of 1.5 mm across all diameters ensures consistent quality and safety. The special TPU material makes the hose permanently antistatic and, if required, even conductive by earthing the spiral. Features: - Wall permanently antistatic (R < 10^9 Ohm/m) - Conductive (R < 10^2 Ohm/m) by earthing the spiral - Very high abrasion resistance - High flexibility, even at low temperatures - Very low weight with high mechanical strength - Resistant to microbes and hydrolysis - Good resistance to mineral oils and many chemicals - Resistant to ageing, UV radiation, ozone, and weathering
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Can be used as a lightweight, highly flexible feeder hose. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Customers Also Bought
for PVC-U (hard). Surfaces must be cleaned with cleaner before bonding!
both sides female thread, conical sealing
both sides female thread, conical sealing
both sides male thread
both sides female thread DIN 2986
