DVGW-PP elbow 90°
Product information "DVGW-PP elbow 90°"
both sides screw connection
| Certification: | DVGW |
|---|---|
| Gasket: | NBR for potable water |
| Material: | PP |
| d | WP (bar) | Packing unit (piece) | Product Number | Delivery Time | |
|---|---|---|---|---|---|
| 20 | 16 | 50/240 | 4604020000 | ||
| 25 | 16 | 30/140 | 4604025000 | ||
| 32 | 16 | 20/90 | 4604032000 | ||
| 40 | 16 | 10/45 | 4604040000 | ||
| 50 | 16 | 25 | 4604050000 | ||
| 63 | 16 | 13 | 4604063000 | ||
| 75 | 16 | 9 | 4604075000 | ||
| 90 | 16 | 5 | 4604090000 | ||
| 110 | 16 | 4 | 4604110000 |
Product data sheet
Skip product gallery
Brass sleeve ball valve type COBI with butterfly handle
female thread / male thread:
3/8"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3055010000
Back plate elbow 90° Speedfit
d:
15
brass, suitable for central heating systems
Product number:
4916015013
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
70
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270070000
COBISANDI PLUS - Sandblast ventilation hose
Inner-Ø (mm):
25
|
Length (m):
40
sand blasting hose for conveying highly abrasive blasting agents such as quartz sand, steel gravel, corundum, glass etc.
Product number:
1379025000
DVGW-PP flange connection
DN:
40
|
d:
50
one side screw connection with flange
Product number:
4612050040
Tip
COBIRAIN - Robust nitrile flat hose
Inner-Ø (mm):
127
|
Length (m):
Abschnitt
COBIRAIN - Robust nitrile flat hose optimal applicable for irrigation plants, industry and construction. Oil-, fuel resistant and resistant to diluted alkalis and diluted acids. High abrasion resistance due to longitudinal grooves in the outer cover. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.
Product number:
1035127000abs
COBITROM LM - Food conveying hose for dry media
Inner-Ø (mm):
75
|
Length (m):
40
suitable for grain, powder, animal feed, PVC granulates. High-grade and high abrasion-proof rubber conveying hose.
Product number:
1155075000
Screw with nut
addition2:
6 x 20 mm
for couplings system, for installation on the outside of hose
Product number:
2132006020
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
76
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270076000
COBITON 10 SP T - Shotcreting hose
Inner-Ø (mm):
32
|
Length (m):
40
jet hose for dry-concrete-shotmachines, water engineering, tunneling, mining and for building. Advantage: extremely wear-resistant, big core, horizontal solid and streamlined, for all conventional fittings.
Product number:
1338032000
COBISANDI PLUS - Sandblast ventilation hose
Inner-Ø (mm):
16
|
Length (m):
40
sand blasting hose for conveying highly abrasive blasting agents such as quartz sand, steel gravel, corundum, glass etc.
Product number:
1379016000
HDPE-quick coupling pipes System Perrot
NW:
159
|
Length (m):
4
one side female coupling, other side male coupling, with 1 clamp each side
Product number:
2454159004
Tension jaw clamps W2
Clamping range (mm):
121-130
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1525121130
COBIPRESS SL - EPDM compressed air hose, super light
Inner-Ø (mm):
19
|
Length (m):
60
extremely light, dimensionally stable air hose, can be fully driven over.
Product number:
1229019060
PVC slide valve
d:
110
with stainless steel slide wedge, both sides bonding socket
Product number:
4570110003
Brass gate valve
Female thread:
1/2"
both sides female thread
with draining
Product number:
3211013000
PVC Threaded socket (Typ COBI)
Female thread:
1 1/4"
without reinforcement ring 2 x female thread
Product number:
4355032000
COBISINTEC RO - Synthetic construction and industry hose
Inner-Ø (mm):
25
|
Length (m):
100
suitable as construction site hose and for water duct. All-weather flat hose without couplings. Rot-proof, abrasion-resistant and durable.
Product number:
1042025000
Hose connection fitting with male thread
for hose (mm):
90
for mounting on hose outside
Product number:
2775100090
PVC Threaded socket (Typ COBI)
Female thread:
3/8"
|
d:
16
with reinforcement ring bonding socket x female thread
Product number:
4308016010
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
45
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270045000
COBISTEAM EN - High-pressure hot steam hose
Inner-Ø (mm):
51
|
Length (m):
Abschnitt
for conveying saturated steam and hot water, good chemical-resistance.
Product number:
1108051000abs
DVGW-PP T-fitting 90°
Male thread:
1 1/2"
|
d:
50
both sides screw connection, with male thread at middle connection
Product number:
4610050038
WEY knife gate valve type VNB with hand lever
DN:
100
with manual lever, for installation as an intermediate flange slider. Pipe passage tightness due to sealing on the narrow side of the plate. An adjustable transverse seal prevents the medium from escaping to the outside. Solid objects are sheared off by the cutting edge of the plate.
Product number:
3185100000
Brass hose connection with male coupling
for hose (mm) x male thread:
25 x 1“ mt
for shell-inclusion, smooth hose connection with safety collar and male thread
Product number:
2053025025
Manometer 63 mm housing, connection 1/4" male thread rear
indicating range (bar):
-1/0
Bourdon tube pressure gauge for liquid and gaseous media, type dry.
Product number:
8126006000
DVGW-PP T-fitting 90°
Male thread:
2"
|
d:
50
both sides screw connection, with male thread at middle connection
Product number:
4610050050
Female coupling with male thread System Perrot
NW:
89
|
Male thread:
2 1/2"
Product number:
2420089063
COBIRAIN GL - Robust nitrile flat hose, smooth cover
Inner-Ø (mm):
65
|
Length (m):
100
optimal applicable for irrigation plants, industry and construction, oil-, fuel-resistant and resistant to diluted alkalis and diluted acids. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.
Product number:
1034065000
Brass sleeve ball valve type industry
Female thread:
4"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3031100000
Emergency shut-off Speedfit
d:
22
not suitable for central heating systems, max. water temperatre +65°C
Product number:
4907022000
COBIRAIN L - Robust nitrile flat hose, lighter version
Inner-Ø (mm):
76
|
Length (m):
100
optimal applicable for irrigation plants, industry and construction, oil-, fuel-resistant and resistant to diluted alkalis and diluted acids. High abrasion resistance due to longitudinal grooves in the outer cover. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.
Product number:
1033075000
Tension jaw clamps W2
Clamping range (mm):
187-200
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1525187200
Tip
COBIRAIN - Robust nitrile flat hose
Inner-Ø (mm):
52
|
Length (m):
Abschnitt
COBIRAIN - Robust nitrile flat hose optimal applicable for irrigation plants, industry and construction. Oil-, fuel resistant and resistant to diluted alkalis and diluted acids. High abrasion resistance due to longitudinal grooves in the outer cover. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.
Product number:
1035052000abs
COBISUPERFLEX - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
51
|
Length (m):
50
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality.
Product number:
1083051000
Tip
COBIRAIN - Robust nitrile flat hose
Inner-Ø (mm):
203
|
Length (m):
Abschnitt
COBIRAIN - Robust nitrile flat hose optimal applicable for irrigation plants, industry and construction. Oil-, fuel resistant and resistant to diluted alkalis and diluted acids. High abrasion resistance due to longitudinal grooves in the outer cover. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.
Product number:
1035203000abs
COBISANDI - Sandblast ventilation hose
Inner-Ø (mm):
25
|
Length (m):
40
flexible sandblast ventilation hose for high abrasiv media as quartz sand, steel gravel, corundum, glass etc.
Product number:
1339025000
COBISINTEC 10 - Synthetic construction and industry hose 10 bar
Inner-Ø (mm):
52-C
|
Length (m):
20
suitable as construction site hose and for water duct. All-weather flat hose, rot-proof, abrasion-resistant and durable. Assembled with aluminium couplings system Storz with long tail.
Product number:
1043052020
COBIPUR S - Heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
200
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, gravel, sand, glass. Especially suitable for suction dredgers. Very flexible special model for heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1330200000abs
COBIDUST KK - PVC suction and blast hose
Inner-Ø (mm):
40
|
Length (m):
Abschnitt
suitable for suction of air, fumes, gas, powders, sawing, dust. For aerating and conditioning plants, wood working plants, for agriculture as drill machine hose, for conveying of gaseous media. Very light and flexible quality. Resistant to atmospheric influences and chemical substances.
Product number:
1263040000abs
Skip product gallery
DVGW-PP screw connection
Male thread:
1"
|
d:
32
one side screw connection, other side male thread
Product number:
4601032025
DVGW-PP screw connection
Male thread:
2"
|
d:
50
one side screw connection, other side male thread
Product number:
4601050050
DVGW-PP screw connection
Male thread:
3/4"
|
d:
25
one side screw connection, other side male thread
Product number:
4601025019
DVGW-PP screw connection
Male thread:
2"
|
d:
63
one side screw connection, other side male thread
Product number:
4601063050
DVGW-PP screw connection
Female thread:
3/4"
|
d:
25
one side screw connection, other side female thread
Product number:
4602025019
DVGW-PP elbow 90°
Female thread:
1"
|
d:
32
one side screw connection, other side female thread
Product number:
4605032025