Female coupling with crimped hose nozzle System Perrot
Product information "Female coupling with crimped hose nozzle System Perrot"
| Material: | steel, galvanized |
|---|
| NW | for hose (mm) | Material | Product Number | Delivery Time | |
|---|---|---|---|---|---|
| 50 | 50 | steel, galvanized | 2410050050 | ||
| 70 | 65 | steel, galvanized | 2410070065 | ||
| 70 | 70 | steel, galvanized | 2410070070 | ||
| 70 | 75 | steel, galvanized | 2410070075 | ||
| 89 | 76 | steel, galvanized | 2410089076 | ||
| 89 | 80 | steel, galvanized | 2410089080 | ||
| 89 | 90 | steel, galvanized | 2410089090 | ||
| 108 | 76 | steel, galvanized | 2410108076 | ||
| 108 | 80 | steel, galvanized | 2410108080 | ||
| 108 | 90 | steel, galvanized | 2410108090 | ||
| 108 | 102 | steel, galvanized | 2410108102 | ||
| 108 | 110 | steel, galvanized | 2410108110 | ||
| 133 | 102 | steel, galvanized | 2410133102 | ||
| 133 | 110 | steel, galvanized | 2410133110 | ||
| 133 | 127 | steel, galvanized | 2410133127 | ||
| 133 | 133 | steel, galvanized | 2410133133 | ||
| 159 | 50 | steel, galvanized | 2410159050 | ||
| 159 | 76 | steel, galvanized | 2410159076 | ||
| 159 | 102 | steel, galvanized | 2410159102 | ||
| 159 | 110 | steel, galvanized | 2410159110 | ||
| 159 | 127 | steel, galvanized | 2410159127 | ||
| 159 | 152 | steel, galvanized | 2410159152 | ||
| 159 | 159 | steel, galvanized | 2410159159 | ||
| 216 | 152 | steel, galvanized | 2410216152 | ||
| 216 | 200 | steel, galvanized | 2410216200 |
Product data sheet
Skip product gallery
COBI Tension jaw clamps W1
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
MASTER-1521
Maßtabelle Kupplungensystem Perrot
Das Kupplungensystem Perrot besteht aus einem M-Teil (Mutterteil) und einem V-Teil (Vaterteil). Das M-Teil besteht aus einem Becherteil mit einem Gummiring und einem hinter dem Becherteil befindlichen beweglichen Ring mit aufgesetztem Hebelwerk. Das Hebelwerk greift hinter den Pilzkopf des V-Teils, um dieses mit dem M-Teil fest zu verbinden. Durch die pilzförmige Bauweise lassen sich M- und V-Teil um bis zu 15° geneigt zusammenkuppeln. Um die exakte Größe der Kupplungen zu bestimmen, werden bei dem M-Teil der Innendurchmesser und bei dem V-Teil der Außendurchmesser gemessen.
NW
A (mm)
B (mm)
50 / 2"
75,0
75,0
70 / 2 1/2"
98,0
102,5
89 / 3"
130,0
134,0
108 / 4"
145,5
155,5
133 / 5"
171,5
179,0
159 / 6"
203,5
211,0
216 / 8"
287,0
312,5
Product number:
Perrot
Skip product gallery
Female coupling with hose connection type C - System Kamlok Aluminium Make LMC
NW:
4"
with stainless steel lever
Product number:
2181100000
Tension jaw clamps W4
Clamping range (mm):
213-226
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1531213226
Pipe double nipple no. 23 black
Male thread:
3"
|
length (mm):
120
both sides male thread according to DIN 2982
Product number:
3850075120
Male coupling with female thread type A - System Kamlok Aluminium
NW:
2 1/2"
Product number:
2164063000
Brass sleeve ball valve type COBI
female thread / male thread:
1/4"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3035006000
PVC pressure pipe
wall thickness (mm):
5,4
|
d:
140
with one bonding socket
Product number:
4000140054
Female coupling with crimped hose nozzle System Perrot
NW:
159
|
for hose (mm):
152
Product number:
2410159152
Hose clamps DIN 20039 A
Clamping range (mm):
115-145
two part, loose tongues.
Product number:
1560127140
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
90
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270090000
PP elbow 90°
Male thread:
3/4"
|
d:
25
one side screw connection, other side male thread
Product number:
4656025019
Male coupling italian coupling system
NW:
200
with bored rectangular flange
Product number:
8307200200
COBIIT PU - PVC/PU-suction- and pressure hose
Inner-Ø (mm):
76
|
Length (m):
30
especially suitable for the graveling and dewatering of flat roofs, suitable for grit, stones, sand, grain and other abrasive media. Robust and moveable quality.
Product number:
1328076000
COBIPRESS FLAT - Compressed air flat hose
Inner-Ø (mm):
52
|
Length (m):
100
for industry, construction and agriculture, for compressed air, sprinkling and irrigation, sewer cleaning, sewage, oil, mild acids and alkalis.
Product number:
1228052100
Alu suction coupling with hose nozzle System Storz
NW:
52-C
|
for hose (mm):
38
Product number:
2103052038
Female coupling System Perrot
NW:
50
for weld on, with assembled lever arrangement and rubber ring
Product number:
2400050000
Female coupling with male thread System Perrot
NW:
70
|
Male thread:
2 1/2"
Product number:
2420070063
Alu-coupling with smooth passage System Storz
NW:
110-A
|
for hose (mm):
102
Especially for pellet hoses. This coupling allows a smoother passage in the hose.
Product number:
2119110102
Male coupling with hose connection type E - System Kamlok Aluminium
NW:
1"
Product number:
2162025000
Food coupling with male thread
NW coupling x for hose (mm):
DN32 x 32 mm
for shell-inclusion with safety collar
Product number:
2715032000
COBIPRESS 20 - Compressed air hose 20 bar
Inner-Ø (mm):
13
|
Length (m):
40
suitable for air containing lubricants and water, for heavy applications
Product number:
1219013000
COBIPRESS 20 - Compressed air hose 20 bar
Inner-Ø (mm):
13
|
Length (m):
Abschnitt
suitable for air containing lubricants and water, for heavy applications
Product number:
1219013000abs
COBIAQUA KU - PE-potable water hose
Inner-Ø (mm):
19
|
Length (m):
50
COBIAQUA KU - PE potable water hose made of soft polyethylene, highly flexible, designed for conveying drinking water as a supply hose for mobile dispensing systems, festivals, fairs, and events. Ideally designed for flexible drinking water supply. The drinking water hose complies with the KTW recommendation of the German Federal Environment Agency (UBA guideline) and the DVGW worksheet W270. Additionally suitable for the food industry, beverage industry, alcoholic liquids, dairy products, and vegetable oils.
Product number:
1009019000
Brass suction and high pressure coupling with hose nozzle System Geka
NW:
1/2"
with adjusting ring
Product number:
3304013000
Female coupling System Perrot
NW:
133
for weld on, with loose, galvanized lever arrangement
Product number:
2401133000
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
60
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270060000
Tension jaw clamps W2
Clamping range (mm):
213-226
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1525213226
COBITROM - Silo conveying hose
Inner-Ø (mm):
75
|
Length (m):
40
suitable for abrasive media, grain, cement, powder. Abrasion-proof rubber conveying hose.
Product number:
1320075009
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
180
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270180000
Flat gasket for weld neck flange DIN 2633
DN:
125
Suitable for hydrocarbons such as oils or solvents, alcohols, glycols, aqueous solutions, water and steam up to 200 °C, as well as weak alkalis and organic acids.
The material is conditionally suitable for ketones and esters, chlorinated solvents, as well as strong alkalis and inorganic acids.
Product number:
2305125000
PVC pressure pipe
wall thickness (mm):
4,8
|
d:
125
with one bonding socket
Product number:
4000125048
Mortar male coupling with female thread
for hose (mm):
25
zur hydraulischen Einpressung
Product number:
2199009025
Female coupling with hose connection type C - System Kamlok PP
NW:
1"
with stainless steel lever
Product number:
2151025000
Pipe double nipple no. 23 black
Male thread:
2"
|
length (mm):
180
both sides male thread according to DIN 2982
Product number:
3850050180
COBITROM - Silo conveying hose
Inner-Ø (mm):
100
|
Length (m):
20
suitable for abrasive media, grain, cement, powder. Abrasion-proof rubber conveying hose.
Product number:
1320100010
COBITROM - Silo conveying hose
Inner-Ø (mm):
100
|
Length (m):
Abschnitt
suitable for abrasive media, grain, cement, powder. Abrasion-proof rubber conveying hose.
Product number:
1320100010abs
Lever set, heavy model
addition2:
8"
for mounting on slurry gate valve. Especially for small spaces.
Product number:
8012200000
Brass angle seat valve
Female thread:
1"
both sides female thread without draining
Product number:
3212025000
Brass sleeve ball valve type COBI
Female thread:
1/4"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3030006000
COBILIGHT SE PLUS - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
40
|
Length (m):
50
specially as a drip hose for liquid manure distribution. Super flexible and cold-resistant quality. UV and weather resistant.
Product number:
1063040000
Brass sleeve ball valve for potable water
female thread / male thread:
1 1/2"
one side female thread, other side male thread
with full bore, useable for potable water according to DIN EN 13828 and DVGW-W 570
Product number:
3033038000
Female coupling System Perrot
NW:
108
for weld on, with assembled lever arrangement and rubber ring
Product number:
2400108000
Stainless steel suction coupling with hose nozzle System Storz
NW:
52-C
|
for hose (mm):
50
Product number:
2106052050
Skip product gallery
Male coupling with crimped hose nozzle System Perrot
NW:
70
|
for hose (mm):
65
Product number:
2415070065
COBI Tension jaw clamps W1
Clamping range (mm):
74-79
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521074079
Female coupling with crimped hose nozzle System Perrot
NW:
108
|
for hose (mm):
80
Product number:
2410108080
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
63
|
Length (m):
50
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082063000
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
63
|
Length (m):
Abschnitt
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082063000abs
COBISUPERFLEX - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
80
|
Length (m):
50
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality.
Product number:
1083080000
Male coupling with crimped hose nozzle System Perrot
NW:
70
|
for hose (mm):
75
Product number:
2415070075
Brass reducing nipple
male thread / female thread:
1" x 3/4"
one side male thread, other side female thread, flat sealing
Product number:
3364025019
Tip
COBIRAIN - Robust nitrile flat hose
Inner-Ø (mm):
127
|
Length (m):
Abschnitt
COBIRAIN - Robust nitrile flat hose optimal applicable for irrigation plants, industry and construction. Oil-, fuel resistant and resistant to diluted alkalis and diluted acids. High abrasion resistance due to longitudinal grooves in the outer cover. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.
Product number:
1035127000abs