Hose clamp two part S 2
Product information "Hose clamp two part S 2"
two part wide-band clamp, heavy conducting
| Material: | Band/housing: steel, galvanized Screw: M10 x 65 steel 8.8., galvanized |
|---|
| Clamping range (mm) | Unit | Packing unit (piece) | Band width (mm) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|
| 110-126 | piece | 10 | 30 | 1545110126 | ||
| 125-141 | piece | 10 | 30 | 1545125141 | ||
| 135-151 | piece | 10 | 30 | 1545135151 | ||
| 150-166 | piece | 10 | 30 | 1545150166 | ||
| 164-180 | piece | 10 | 30 | 1545164180 | ||
| 215-231 | piece | 10 | 30 | 1545215231 |
Product data sheet
Skip product gallery
Hose clamp two part M 2
two part wide-band clamp to clamping range 60-70 mm screw M6 x 45 from clamping range 65-75 mm screw M8 x 60
Product number:
MASTER-1540
Skip product gallery
Pipe double nipple no. 23 galvanized
Male thread:
1"
|
length (mm):
150
both sides male thread according to DIN 2982
Product number:
3750025150
Coupling key für couplings System Storz A-B-C
NW:
110-A / 75-B
with cold protection lever
Product number:
2121110002
Skip product gallery
Brass non-return valve
Female thread:
1/2"
both sides female thread, with spring loaded tape up to 1” open pressure 0,1 bar and by 2” open pressure 0,2 bar
Product number:
3220013000
Malleable cast iron Reducing double nipple no. 245
Male thread:
1" x 1/2"
both sides male thread
Product number:
3725025013
COBI Tension jaw clamps W1
Clamping range (mm):
36-39
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521036039
Hose clamp two part S 2
Clamping range (mm):
135-151
two part wide-band clamp, heavy conducting
Product number:
1545135151
COBISAUG - Highly flexible rubber spiral suction hose with spiral free cuffs
Inner-Ø (mm):
110
|
Length (m):
1
suitable for agriculture, construction trade and industry. Suitable for water, waste water, sewage and low concentrated alkalis and acids. Both sides smooth and spiral free cuffs.
Product number:
1052110010
TW curve piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
100 x 4" IG
with female thread
Product number:
2001100000
Capped dome cover
addition2:
rubber lip for float ball 100 mm
suitable for dome 290 mm Ø, consists of: cap, dome cover, dome cover gasket and lateral cast-in connection for vacuum manometer 1/2”, cap with three-step connection 60, 75 and 80 mm Ø (connection 80 mm Ø is achieved by cutting nozzle 75 mm Ø off)
Product number:
8100100000
COBI Tension jaw clamps W1
Clamping range (mm):
68-73
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521068073