Jurop-vacuum pump type PNR-D
Product information "Jurop-vacuum pump type PNR-D"
with air injection cooling and direct drive - broached shaft left-hand turning
Skip product gallery
Rotor blades
addition2:
PNE 122/124
|
dimesnsions (mm):
78,5 x 5,8 x 418,4
Replacement rotor blades. Each pump requires several blades. Please order the required number.
Product number:
21601605600
Rotor blades
addition2:
M 3
|
dimesnsions (mm):
60,0 x 7,50 x 243,0
Replacement rotor blades. Each pump requires several blades. Please order the required number.
Product number:
9800003003
Skip product gallery
PE reduction SDR 11
d:
125 x 75
PE 100 SDR 11 / 10 bar gas / 16 bar water
Product number:
4739125075
Malleable cast iron Bend 90° Nr. 2
Female thread:
3"
both sides female thread
Product number:
3703075000
Brass safety valve
WP (bar):
1
|
Male thread:
1 1/2"
with hose connection and male thread, with rustless spring, non-tested part
Product number:
8200038010
COBILIGHT - PVC suction and pressure hose for light applications
Inner-Ø (mm):
102
|
Length (m):
Abschnitt
suitable for conveying of water, waste water and feces in the agriculture and industry, irrigation and draining. Light and flexible quality. Resistant to many chemicals, UV and weather resistant.
Product number:
1060102000abs
COBILIGHT SE PLUS - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
40
|
Length (m):
50
specially as a drip hose for liquid manure distribution. Super flexible and cold-resistant quality. UV and weather resistant.
Product number:
1063040000
PVC threaded socket
Female thread:
3/8" x 3/8"
2 x female thread without reinforcement ring
Product number:
4301010000
PVC adaptor nipple
Male thread:
1 1/4"
|
d:
32 x 40
injection moulding with bonding connection / bonding socket and straight male thread
Product number:
4311032032
Tip
COBITANK EN - Oil- and petrol-resistant suction and pressure hose according to EN 12115
Inner-Ø (mm):
75
|
Length (m):
Abschnitt
suitable for loading and unloading tankers and railway tank wagons. Suitable for mineral oil products with max. 50% aromatic content. Suitable for various technical oils.
Product number:
1409075000abs
PVC Reducer (Typ COBI)
male thread / female thread:
4" x 2 1/2"
male thread x female thread
Product number:
4313100063
COBICOOL - EPDM-radiator hose
Inner-Ø (mm):
63
|
Length (m):
Abschnitt
suitable for passing water in the cooling circuit. Resistant to a variety of antifreeze.
Product number:
1015063000abs
Female coupling with male thread type B - System Kamlok stainless steel
NW:
1/2"
with stainless steel lever
Product number:
2175013000
PVC Threaded socket (Typ COBI)
Female thread:
3/8"
without reinforcement ring 2 x female thread
Product number:
4355010000
Brass non-return valve
Female thread:
3/4"
both sides female thread, with spring loaded tape up to 1” open pressure 0,1 bar and by 2” open pressure 0,2 bar
Product number:
3220019000
PVC reducing socket
d:
20 / 16 x 10
bonding connection/bonding socket x bonding socket
Product number:
4281016010
Stainless steel reducing socket
Female thread:
1" x 1/2"
both sides female thread
Product number:
5040025013
Lever set lockable
addition2:
8"
for mounting on slurry gate valve, without screws. With borehole to close the lever.
Product number:
8011200000
PVC T-fitting 90° reduced
d:
90 x 63
3 x bonding socket, outlet in the middle reduced
Product number:
4200090063
COBISUPERFLEX TOP - High flexible rubber spiral suction and conveying hose with spiral free cuffs
Inner-Ø (mm):
80
|
Length (m):
5
with high abrasion-proof internal lining, suitable for abrasive media such as sand, grit, stones, fly ash, blasting agents. Both sides spiral free cuffs.
Product number:
1301080005
HDPE-quick coupling pipes System Perrot
NW:
108
|
Length (m):
2
one side female coupling, other side male coupling, with 1 clamp each side
Product number:
2454108002
Male coupling with flange System Perrot stainless steel
NW:
50
type Optima
Product number:
2517050000
PP-Sleeve ball valve type 220
Female thread:
1/2"
both sides female thread
with full bore
Product number:
3025013000
PP hose nozzle 90° two-part
Female thread:
3/4"
|
hose nozzle (mm):
16
bent with female thread and nozzle
Product number:
4968019016
Spare parts for Muffler
addition2:
metal insertion for oil separator 7.300l
Product number:
9092000002