Male coupling for clamping rings with smooth hose nozzle System Bauer
Product information "Male coupling for clamping rings with smooth hose nozzle System Bauer"
for the special integration of flat hoses with clamping rings, with short hose nozzle
| Material: | steel, galvanized |
|---|
Skip product gallery
Clamping rings for alu pressure coupling System Storz and System Perrot for clamping rings
wall thickness (mm):
2,8 - 3,2
|
for hose (mm):
101,5
three-part with screw and nut
Product number:
2141100000
Female coupling for clamping rings with smooth hose nozzle System Bauer
NW:
108
|
for hose (mm):
100
for the special integration of flat hoses with clamping rings, with short hose nozzle
Product number:
2691108000
Maßtabelle Kupplungensystem Bauer
Das Kupplungensystem Bauer besteht aus einer M-Kupplung (Kugel) und einer V-Kupplung (Becher). Die M-Kupplung hat zusätzlich zu der Kugel einen beweglichen Ring mit aufgesetztem Hebelwerk. Das Hebelwerk greift hinter den Becher der V-Kupplung, um dieses mit der M-Kupplung fest zu verbinden. Das System Bauer ist so konzipiert, dass sich M- und V-Kupplung um bis zu 20° geneigt zusammenkuppeln lassen. Um die exakte Größe der Kupplungen zu bestimmen, wird bei der M-Kupplung der Außendurchmesser und bei der V-Kupplung der Innendurchmesser gemessen.
NW
A (mm)
B (mm)
50 / 2"
70
71
76 / 2 1/2"
98
99
89 / 3"
120
121
108 / 4"
145
148
133 / 5"
158
163
159 / 6"
179
182
194 / 8"
229
231
250 / 10"
305
297
Product number:
Bauer
Skip product gallery
COBIWATER - Rubber waterhose 10 bar
Inner-Ø (mm):
19
|
Length (m):
50
suitable as standard waterhose for gardening, industry and construction
Product number:
1002019000
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
127
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270127000
PP clamp saddle
Female thread:
3/4"
|
d:
50
without reinforcement ring, with female thread
Product number:
4452050019
Brass sleeve ball valve type COBI
Female thread:
3"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3030075000
Tension jaw clamps W4
Clamping range (mm):
63-68
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1531063068
Alu fixed coupling with female thread System Storz
NW:
52-C
|
Female thread:
1"
Product number:
2101052025
T-coupling female-male coupling with lateral outlet female coupling System Perrot
NW:
female/male 108 x lateral outlet female 108
Product number:
2436108108
COBIQUICK Clamping flange with rotated hose nozzle
NW:
6"
|
for hose (mm):
152
with rubber ring in the flange surface
Product number:
2551150000
COBIAQUA PU FLAT - Potable flat hose with Storz Couplings
Inner-Ø (mm):
75-B
|
Length (m):
50
High-quality flat drinking water hose, ideally suited for potable water supply applications, e.g. as a drinking water transfer hose or emergency supply hose. The drinking water hose is fully fitted with Storz system couplings. The connectors are made of brass, and the lugs are made of aluminium. Equipped with blue, drinking-water-approved seals and stainless steel wire binding. Features: - Suitable for use in drinking water supply - Resistant to oil, petrol, and chemicals - Ageing, ozone, and UV resistant - Robust design for professional use
Product number:
1020075050
Female coupling with crimped hose nozzle System Perrot
NW:
159
|
for hose (mm):
127
Product number:
2410159127
Pipe double nipple no. 23 galvanized
Male thread:
2"
|
length (mm):
100
both sides male thread according to DIN 2982
Product number:
3750050100
Stainless steel clamping shells EN 14420-3
for hose x wall thickness (mm):
25 x 6
for inclusion of couplings with smooth hose connections and safety collar, two-part, complete with hexagon socket screw and nut
Product number:
2072025006
Tension jaw clamps W2
Clamping range (mm):
55-59
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1525055059
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
32,5
|
Length (m):
80
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485032080
Brass sleeve ball valve type industry
Female thread:
1/4"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3031006000
COBIAIR - PVC compressed air hose
Inner-Ø (mm):
16
|
Length (m):
50
fabric hose suitable for air, water and food, conditional oil-and chemical-resistant. Suitable for hydraulic systems with low pressure.
Product number:
1201016000
Malleable cast iron T-fitting 90° reduced no. 130
Female thread:
1 1/4" x 3/4" x 1 1/4"
all sides female thread with reduced middle outlet
Product number:
3717032019
DVGW-PP elbow 90°
Female thread:
1 1/4"
|
d:
50
one side screw connection, other side female thread
Product number:
4605050032
Alu pressure coupling for clamping rings with short hose nozzle System Storz
NW:
52-C
|
for hose (mm):
52
for the special integration of flat hoses with clamping rings, with short hose nozzle
Product number:
2140052000
DVGW-PP elbow 90°
Male thread:
3"
|
d:
90
one side screw connection, other side male thread
Product number:
4606090075
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
152
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270152000
Brass sleeve ball valve type COBI
female thread / male thread:
2 1/2"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3035063000
Tension jaw clamps W2
Clamping range (mm):
63-68
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1525063068
COBITON 10 SP T - Shotcreting hose
Inner-Ø (mm):
32
|
Length (m):
40
jet hose for dry-concrete-shotmachines, water engineering, tunneling, mining and for building. Advantage: extremely wear-resistant, big core, horizontal solid and streamlined, for all conventional fittings.
Product number:
1338032000
PP hose nozzle 90° two-part
Female thread:
1"
|
hose nozzle (mm):
22
bent with female thread and nozzle
Product number:
4968025022
Brass suction hose connection with male thread
for hose (mm) x male thread:
25 x 3/4“ mt
useable for clamp-inclusion, corrugated hose connection with male thread, hexagon collar, flat sealing
Product number:
3330019025
Male coupling as blind coupling type DP - System Kamlok stainless steel
NW:
3/4"
Product number:
2179019000
DVGW-PP elbow 90°
Female thread:
2 1/2"
|
d:
63
one side screw connection, other side female thread
Product number:
4605063063
Stainless steel clamping shells EN 14420-3
for hose x wall thickness (mm):
75 x 8
for inclusion of couplings with smooth hose connections and safety collar, two-part, complete with hexagon socket screw and nut
Product number:
2072075008
COBISUPERELASTIC - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
76
|
Length (m):
Abschnitt
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality. Outer cover particularly protected against abrasion by increased external spiral.
Product number:
1086076000abs
Stainless steel clamping shells EN 14420-3
for hose x wall thickness (mm):
32 x 6
for inclusion of couplings with smooth hose connections and safety collar, two-part, complete with hexagon socket screw and nut
Product number:
2072032006
DVGW-PP screw connection
Female thread:
2"
|
d:
90
one side screw connection, other side female thread
Product number:
4602090050
Female coupling italian coupling system
NW:
100
with rubber ring, for weld on
Product number:
8300100000
Adapter nipple for hand screw coupling with female thread
Female thread:
1/4"
M22 x 1,5 male thread
Product number:
6115006000
Safety clamp FS System Storz
NW:
75-B / 52-C
to secure hose couplings against independent uncoupling
Product number:
2143075052
Tension jaw clamps W4
Clamping range (mm):
121-130
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1531121130
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
13
|
Length (m):
100
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485013100
Brass sleeve ball valve type COBI
female thread / male thread:
1 1/4"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3035032000
Cone packing with union nut
NW:
13
for rubber tube cleaning hose COBIROKAN
Product number:
2994013013