Male coupling with flaked hose nozzle System Perrot stainless steel
Product information "Male coupling with flaked hose nozzle System Perrot stainless steel"
type Optima
| Material: | stainless steel |
|---|
| NW | for hose (mm) | Material | Product Number | Delivery Time | |
|---|---|---|---|---|---|
| 50 | 50 | stainless steel | 2515050050 | ||
| 70 | 60 | stainless steel | 2515070060 | ||
| 70 | 65 | stainless steel | 2515070065 | ||
| 70 | 70 | stainless steel | 2515070070 | ||
| 89 | 75 | stainless steel | 2515089075 | ||
| 89 | 80 | stainless steel | 2515089080 | ||
| 89 | 90 | stainless steel | 2515089090 | ||
| 108 | 100 | stainless steel | 2515108100 | ||
| 108 | 110 | stainless steel | 2515108110 | ||
| 159 | 100 | stainless steel | 2515159100 | ||
| 159 | 150 | stainless steel | 2515159150 |
Product data sheet
Skip product gallery
Tension jaw clamps W4
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
MASTER-1531
COBI Tension jaw clamps W1
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
MASTER-1521
Maßtabelle Kupplungensystem Perrot
Das Kupplungensystem Perrot besteht aus einem M-Teil (Mutterteil) und einem V-Teil (Vaterteil). Das M-Teil besteht aus einem Becherteil mit einem Gummiring und einem hinter dem Becherteil befindlichen beweglichen Ring mit aufgesetztem Hebelwerk. Das Hebelwerk greift hinter den Pilzkopf des V-Teils, um dieses mit dem M-Teil fest zu verbinden. Durch die pilzförmige Bauweise lassen sich M- und V-Teil um bis zu 15° geneigt zusammenkuppeln. Um die exakte Größe der Kupplungen zu bestimmen, werden bei dem M-Teil der Innendurchmesser und bei dem V-Teil der Außendurchmesser gemessen.
NW
A (mm)
B (mm)
50 / 2"
75,0
75,0
70 / 2 1/2"
98,0
102,5
89 / 3"
130,0
134,0
108 / 4"
145,5
155,5
133 / 5"
171,5
179,0
159 / 6"
203,5
211,0
216 / 8"
287,0
312,5
Product number:
Perrot
Skip product gallery
Pneumatic cylinder MZ double acting, with magnetic sensories
addition2:
gasket set 6“
suitable for valves 8004*, 8006*, 8007*, 8008*
Product number:
8052150005
COBISTEAM EN - High-pressure hot steam hose 18 bar
Inner-Ø (mm):
19
|
Length (m):
Abschnitt
for conveying saturated steam and hot water in closed systems within the chemical, petrochemical and construction industries. Good chemical resistance.
Caution: Use only suitable fittings according to EN 14423.
Product number:
1108019000abs
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
45
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329045000abs
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
50
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329050000abs
Brass sleeve ball valve for gas
female thread / male thread:
1"
one side femal thread, other side male thread
with full bore, useable for gas according to DIN EN 10226-1 and DVGW-certification. PN 5 for gas, PN 25-50 for other media
Product number:
3036025000
Half screw fitting assortment for COBIKANTEX
NW:
19
Screw socket and cone packing with male thread
Product number:
2981019000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
200
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329200000
COBIAIR TYP F - PVC compressed air hose in different colours
Hose color:
red-transparent
|
Inner-Ø (mm):
19
|
Length (m):
50
in different colours, suitable for air, water, hydraulic systems, conditional oil-and chemical-resistant, food quality!
Product number:
1204019000rot
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
160
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329160000abs
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
120
both sides male thread according to DIN 2982
Product number:
3750013120
Pipe double nipple no. 23 galvanized
Male thread:
3/4"
|
length (mm):
180
both sides male thread according to DIN 2982
Product number:
3750019180
Tip
COBIDRUCK - Rubber spiral suction and pressure hose 10 bar
Inner-Ø (mm):
38
|
Length (m):
40
suitable for agriculture, construction trade and industry. Suitable for water, waste water, sewage and low concentrated alkalis and acids. Robust and kink resistant rubber suction and pressure hose.
Product number:
1050038000
Tip
COBIDRUCK - Rubber spiral suction and pressure hose 10 bar
Inner-Ø (mm):
25
|
Length (m):
Abschnitt
suitable for agriculture, construction trade and industry. Suitable for water, waste water, sewage and low concentrated alkalis and acids. Robust and kink resistant rubber suction and pressure hose.
Product number:
1050025000abs
Pipe double nipple no. 23 galvanized
Male thread:
1"
|
length (mm):
120
both sides male thread according to DIN 2982
Product number:
3750025120
COBIKASPI PLUS - Cassettes boom hose, very flexible
Inner-Ø (mm):
110/100
|
Length (m):
20
for all standard sewer cleaning vehicles for suction of waste water, waste and residues from the sewer. Resistant to traces of oil. Very flexible even at low temperatures and thus offers optimum running properties within the cassette of a sewer cleaning vehicle. Conductive and very resistant to abrasion.
Product number:
1430100000
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
80
both sides male thread according to DIN 2982
Product number:
3750013080
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
40
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329040000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
250
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329250000abs
Male coupling with hose ferrule System Perrot
NW:
50
for mounting on the outside of the hose. Coupling is screwed to the tube. Screed conveyor coupling system Perrot
Product number:
2253050000
Stainless steel hose connection with male coupling
for hose (mm) x male thread:
75 x 3“ mt
for shell-inclusion, smooth hose connection with safety collar and male thread
Product number:
2057075075
Alu fixed coupling with male thread System Storz
NW:
52-C
|
Male thread:
2 1/2"
Product number:
2102052063
PVC T-fitting 90°
Female thread:
1"
|
d:
32
bonding socket x female thread x bonding socket with reinforcement ring
Product number:
4220032025
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
60
both sides male thread according to DIN 2982
Product number:
3750013060
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
180
both sides male thread according to DIN 2982
Product number:
3750013180
Tip
COBIDRUCK - Rubber spiral suction and pressure hose 10 bar
Inner-Ø (mm):
203
|
Length (m):
20
suitable for agriculture, construction trade and industry. Suitable for water, waste water, sewage and low concentrated alkalis and acids. Robust and kink resistant rubber suction and pressure hose.
Product number:
1050203000
Brass sleeve ball valve for gas
female thread / male thread:
1 1/2"
one side femal thread, other side male thread
with full bore, useable for gas according to DIN EN 10226-1 and DVGW-certification. PN 5 for gas, PN 25-50 for other media
Product number:
3036038000
Brass sleeve ball valve for gas
female thread / male thread:
3/4"
one side femal thread, other side male thread
with full bore, useable for gas according to DIN EN 10226-1 and DVGW-certification. PN 5 for gas, PN 25-50 for other media
Product number:
3036019000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
110
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329110000
COBIPUR S - Heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
152
|
Length (m):
5
suitable for sharp-edged media, granulates, gravel, sand, glass. Especially suitable for suction dredgers. Special model for heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals. Absolutely seamless and smooth inner wall, optimal flow characteristics.
Product number:
1330152005
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
100
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329100000
COBIORPU - Light weight Polyurethane exhaust ventilation hose
Inner-Ø (mm):
200
|
Length (m):
10
suitable for powder, grain mixture, wood shaving, dust, isolating materials, grass and deciduous exhaust ventilation, food and chemicals. Very moveable and abrasion-proof PU hose for light applications. Microbes and hydrolysis resistant.
Product number:
1333200000
Pipe double nipple no. 23 galvanized
Male thread:
1"
|
length (mm):
180
both sides male thread according to DIN 2982
Product number:
3750025180
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
160
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329160000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
75
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329075000abs
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
152
|
Length (m):
5
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082152005
TW female coupling made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
100 x 4" IG
with female thread
Product number:
2006100000
Flat gasket for flange adaptor
d:
250
for flange adaptor, with grounding clip
Product number:
4420250001
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
25,2
|
Length (m):
120
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485025120
COBIOIL - Oil-and petrol-resistant pressure hose 10 bar
Inner-Ø (mm):
13
|
Length (m):
40
Highly flexible multipurpose hose suitable for mineral oil products with a max. aromatic content of 40%. Weather- and ageing-resistant. Suitable for hand pumps and electric pumps.
Product number:
1403013000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
180
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329180000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
250
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329250000
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
40
both sides male thread according to DIN 2982
Product number:
3750013040
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
152
|
Length (m):
6
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082152006
COBIFLAT M2 - Middle-heavy PVC flat hose, double layer
Inner-Ø (mm):
127
|
Length (m):
Abschnitt
Universally applicable two-layer medium-heavy flat hose for construction, industry and agriculture. Ideally suited as a pressure hose for irrigation. As an inlet and outlet hose for water and other media, can be rolled up flat. Robust and durable quality.
Product number:
1036127000abs