Male coupling with hose nozzle System Bauer
Product information "Male coupling with hose nozzle System Bauer"
with rubber ring
| Material: | steel, galvanized |
|---|
| NW | for hose (mm) | Material | Product Number | Delivery Time | |
|---|---|---|---|---|---|
| 76 | 63 | steel, galvanized | 2607076063 | ||
| 76 | 76 | steel, galvanized | 2607076076 | ||
| 89 | 75 | steel, galvanized | 2607089075 | ||
| 89 | 89 | steel, galvanized | 2607089089 | ||
| 108 | 102 | steel, galvanized | 2607108100 | ||
| 108 | 110 | steel, galvanized | 2607108110 | ||
| 133 | 125 | steel, galvanized | 2607133125 | ||
| 159 | 150 | steel, galvanized | 2607159150 |
Product data sheet
Skip product gallery
COBI Tension jaw clamps W1
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
MASTER-1521
Maßtabelle Kupplungensystem Bauer
Das Kupplungensystem Bauer besteht aus einer M-Kupplung (Kugel) und einer V-Kupplung (Becher). Die M-Kupplung hat zusätzlich zu der Kugel einen beweglichen Ring mit aufgesetztem Hebelwerk. Das Hebelwerk greift hinter den Becher der V-Kupplung, um dieses mit der M-Kupplung fest zu verbinden. Das System Bauer ist so konzipiert, dass sich M- und V-Kupplung um bis zu 20° geneigt zusammenkuppeln lassen. Um die exakte Größe der Kupplungen zu bestimmen, wird bei der M-Kupplung der Außendurchmesser und bei der V-Kupplung der Innendurchmesser gemessen.
NW
A (mm)
B (mm)
50 / 2"
70
71
76 / 2 1/2"
98
99
89 / 3"
120
121
108 / 4"
145
148
133 / 5"
158
163
159 / 6"
179
182
194 / 8"
229
231
250 / 10"
305
297
Product number:
Bauer
Skip product gallery
Tip
COBIRAIN - Robust nitrile flat hose
Inner-Ø (mm):
90
|
Length (m):
100
COBIRAIN - Robust nitrile flat hose optimal applicable for irrigation plants, industry and construction. Oil-, fuel resistant and resistant to diluted alkalis and diluted acids. High abrasion resistance due to longitudinal grooves in the outer cover. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.
Product number:
1035090000
COBIRAIN L - Robust nitrile flat hose, lighter version
Inner-Ø (mm):
102
|
Length (m):
100
optimal applicable for irrigation plants, industry and construction, oil-, fuel-resistant and resistant to diluted alkalis and diluted acids. High abrasion resistance due to longitudinal grooves in the outer cover. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.
Product number:
1033102000
PP screw connection
Male thread:
1"
|
d:
25
one side screw connection, other side male thread
Product number:
4651025025
COBIAQUA KU - PE-potable water hose
Inner-Ø (mm):
13
|
Length (m):
50
COBIAQUA KU - PE potable water hose made of soft polyethylene, highly flexible, designed for conveying drinking water as a supply hose for mobile dispensing systems, festivals, fairs, and events. Ideally designed for flexible drinking water supply. The drinking water hose complies with the KTW recommendation of the German Federal Environment Agency (UBA guideline) and the DVGW worksheet W270. Additionally suitable for the food industry, beverage industry, alcoholic liquids, dairy products, and vegetable oils.
Product number:
1009013000
PP screw connection
Male thread:
3"
|
d:
90
one side screw connection, other side male thread
Product number:
4651090075
PP-Sleeve ball valve type 220
Female thread:
3/4"
both sides female thread
with full bore
Product number:
3025019000
TW cap made of stainless steel according to DIN EN 14420-6 (DIN 28450)
NW:
2"
Tank truck coupling blank cap for sealing the TW short coupling (VK)
Product number:
2015050002
DVGW-PP screw connection
Male thread:
3"
|
d:
90
one side screw connection, other side male thread
Product number:
4601090075
MZ brass lever gate valve ART. 0030
Female thread:
6"
both sides female thread
Product number:
3207150000
DVGW-PP T-fitting 90°
Male thread:
1/2"
|
d:
20
both sides screw connection, with male thread at middle connection
Product number:
4610020013
Brass sleeve ball valve type COBI
female thread / male thread:
4"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3035100000
COBIPRESS SL - EPDM compressed air hose, super light
Inner-Ø (mm):
19
|
Length (m):
40
extremely light, dimensionally stable air hose, can be fully driven over.
Product number:
1229019040
DVGW-PP T-fitting 90°
Female thread:
4"
|
d:
90
both sides screw connection, with female thread at middle connection
Product number:
4609090100
PP screw connection
Male thread:
2"
|
d:
90
one side screw connection, other side male thread
Product number:
4651090050
COBIPRESS SL - EPDM compressed air hose, super light
Inner-Ø (mm):
19
|
Length (m):
20
extremely light, dimensionally stable air hose, can be fully driven over.
Product number:
1229019020
Pipe coupling screw connection with female thread
d:
50
one side male thread, other side screw connection
Product number:
3454050038
PP screw connection
Male thread:
2"
|
d:
75
one side screw connection, other side male thread
Product number:
4651075050
Malleable cast iron Elbow connector no. 221
Female thread:
3/4"
all sides female thread
Product number:
3721019000
Manometer 63 mm housing, connection 1/4" male thread bottom
indicating range (bar):
-1/+1,5
|
red marking:
-0,5/+1
Bourdon tube pressure gauge for liquid and gaseous media, type dry. With 2 red markers in the display area.
Product number:
8112006010
COBISANDI PLUS - Sandblast ventilation hose
Inner-Ø (mm):
25
|
Length (m):
40
sand blasting hose for conveying highly abrasive blasting agents such as quartz sand, steel gravel, corundum, glass etc.
Product number:
1379025000
DVGW-PP T-fitting 90°
Female thread:
3/4"
|
d:
16
both sides screw connection, with female thread at middle connection
Product number:
4609016019
Capped dome cover
addition2:
spare bottom piece
suitable for dome 290 mm Ø, consists of: cap, dome cover, dome cover gasket and lateral cast-in connection for vacuum manometer 1/2”, cap with three-step connection 60, 75 and 80 mm Ø (connection 80 mm Ø is achieved by cutting nozzle 75 mm Ø off)
Product number:
8100000002
DVGW-PP screw connection
Female thread:
1"
|
d:
20
one side screw connection, other side female thread
Product number:
4602020025
Jurop-vacuum pump type PNR-D
addition2:
PNR 72 D
with air injection cooling and direct drive - smooth shaft left-hand turning
Product number:
9110072000
COBIPRESS SL - EPDM compressed air hose, super light
Inner-Ø (mm):
19
|
Length (m):
60
extremely light, dimensionally stable air hose, can be fully driven over.
Product number:
1229019060
PVC reducing bush type B
Female thread:
5"
|
d:
160
bonding connection x female thread, injection moulding
Product number:
4319160125
Capped dome cover
addition2:
gasket between top and bottom sections
suitable for dome 290 mm Ø, consists of: cap, dome cover, dome cover gasket and lateral cast-in connection for vacuum manometer 1/2”, cap with three-step connection 60, 75 and 80 mm Ø (connection 80 mm Ø is achieved by cutting nozzle 75 mm Ø off)
Product number:
8100000003
DVGW-PP screw connection
Female thread:
3/4"
|
d:
32
one side screw connection, other side female thread
Product number:
4602032019
DVGW-PP T-fitting 90°
Female thread:
2 1/2"
|
d:
63
both sides screw connection, with female thread at middle connection
Product number:
4609063063
Brass Y-fitting
Female thread:
3/4"
|
Male thread:
3/4"
2 x male thread / 1 x female thread, nominal diameter 1/2“
Product number:
3368019000
COBISANDI PLUS - Sandblast ventilation hose
Inner-Ø (mm):
19
|
Length (m):
40
sand blasting hose for conveying highly abrasive blasting agents such as quartz sand, steel gravel, corundum, glass etc.
Product number:
1379019000
PVC Reducer, short (Typ COBI)
male thread / female thread:
1 1/2" x 1 1/4"
male thread x female thread
Product number:
4317038032
Cone packing with union nut
NW:
13
for rubber tube cleaning hose COBIROKAN
Product number:
2994013013
PP screw connection
Female thread:
1/2"
|
d:
16
one side screw connection, other side female thread
Product number:
4652016013
Pipe coupling T-fitting with male thread
d:
40
both sides screw connection with external thread outlet
Product number:
3458040032
Brass sleeve ball valve type COBI
Female thread:
4"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3030100000
MZ-two- and three-way flange cock with hydraulic cylinder
DN:
100
with brass rotary plug valve and hydraulic cylinder, housed lubricator nipple and gaskets
Product number:
8460100150
Brass T-fitting, reduced
Female thread:
1" x 3/4" x 1"
all sides female thread
Product number:
3359025019
Pipe coupling T-fitting with male thread
d:
25
both sides screw connection with external thread outlet
Product number:
3458025019
RIV siphon separator
for hose (mm):
60
connection above straight, lateral connection 90°, with 1/4” female thread for vacuum manometer
Product number:
8220060000
COBISANDI PLUS - Sandblast ventilation hose
Inner-Ø (mm):
32
|
Length (m):
40
sand blasting hose for conveying highly abrasive blasting agents such as quartz sand, steel gravel, corundum, glass etc.
Product number:
1379032000
Skip product gallery
Female coupling with hose nozzle System Bauer
NW:
133
|
for hose (mm):
125
with lever arrangement
Product number:
2606133125
COBI Tension jaw clamps W1
Clamping range (mm):
140-148
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521140148
Male coupling with hose nozzle System Bauer
NW:
159
|
for hose (mm):
150
with rubber ring
Product number:
2607159150