Manometer 50 mm housing for pressure regulator, connection 1/4" male thread rear
Product information "Manometer 50 mm housing for pressure regulator, connection 1/4" male thread rear"
| Accuracy class: | 1,6 (1,6% max. measurement deviation) |
|---|---|
| Case diameter: | 50 mm |
| Casing: | steel, black |
| Connection: | brass, rear with male thread |
| indicating range (bar) | Male thread | Product Number | Delivery Time | |
|---|---|---|---|---|
| 0/+10 | 1/4" | 3250006000 |
Product data sheet
Last Seen
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Can be used as a lightweight, highly flexible feeder hose. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
for pressing the rubber hose with the coupling
Press dowel and cone packing with union nut
both sides female thread with full bore, useable for potable water according to DIN EN 13828 and DVGW-W 570
three-part with screw and nut
with female thread
with lever arrangement
especially as a rigid fixed length (hose end piece) for liquid manure towline distributors. Resistant to many chemicals, UV and weather resistant.
for all standard sewer cleaning vehicles for suction of waste water, waste and residues from the sewer. Resistant to traces of oil. Very flexible even at low temperatures and thus offers optimum running properties within the cassette of a sewer cleaning vehicle. Conductive and very resistant to abrasion.
Customers Also Bought
both sides male thread, with dirt trap, form pressure up to 16 bar, final pressure 1.5-6 bar adjustable, DVGW-certificated, with acoustic protection, without manometer, for water up to +75°C permanent operation, not for steam, barrel (cartouche) is changeable
bonding socket x female thread without reinforcement ring
with hose screw connection, useable for not aggressive media
bonding socket x female thread without reinforcement ring