PE Elbow 45° PE100 / SDR11
Product information "PE Elbow 45° PE100 / SDR11"
- Long-arm version
- 16 bar water
- Made from seamless pipe
- Seamless bends must not be shortened
- Radius 1.5 x d
| Material: | PE |
|---|
| d | WP (bar) | Product Number | Delivery Time | |
|---|---|---|---|---|
| 63 | SDR 11 | 4723063000 | ||
| 75 | SDR 11 | 4723075000 | ||
| 90 | SDR 11 | 4723090000 | ||
| 110 | SDR 11 | 4723110000 | ||
| 125 | SDR 11 | 4723125000 | ||
| 140 | SDR 11 | 4723140000 | ||
| 160 | SDR 11 | 4723160000 | ||
| 180 | SDR 11 | 4723180000 | ||
| 200 | SDR 11 | 4723200000 | ||
| 225 | SDR 11 | 4723225000 | ||
| 250 | SDR 11 | 4723250000 | ||
| 280 | SDR 11 | 4723280000 | ||
| 315 | SDR 11 | 4723315000 |
Product data sheet
Last Seen
with quadrilateral flange on both sides stainless steel valve wedge and screws, 2 gaskets
two part wide-band clamp
both sides female thread, flat sealing, without gasket
with hand wheel, for installation as an intermediate flange slider. Pipe passage tightness due to sealing on the narrow side of the plate. An adjustable transverse seal prevents the medium from escaping to the outside. Solid objects are sheared off by the cutting edge of the plate.
- For butt fusion and electrofusion welding- Long-arm version- 16 bar water- Made from seamless pipe- Seamless bends must not be shortened- Radius 1.5 x d
with bored rectangular flange
- For butt fusion and electrofusion welding- Long-arm version- 10 bar water- Made from seamless pipe- Seamless bends must not be shortened- Radius 1.5 x d
The SUPREME® high quality multipurpose hose combines the best of the 3 most common hose applications: - resistant to hat water and light chemicals - resistant to oil and fuel - resistant to high temperature Additionally SUPREME® stands for an abrasion, ozone and weather resistant cover and ensures highest pressure rates with safety factor of 4:1. Designed for different challenging multipurpose applications - construction sites, agriculture or industrial plants. Our Supreme® multipurpose hose can be used for B7 [EN 590:2017] and B20 with a maximum aromatic content of 40%. lt's not recommended to use our Supreme hose for B100 [pure biodiesel / 100%FAME/RME] as weil as E5 [EN 228:2017]. E10, E85 and E100 as the material properties might be affected and weakened during usage. The used high quality performance rubber ensures outstanding properties for heat and oil resistance. Therefore the used liner fulfills RMA class A and the cover compound is according to RMA class B. The special hose construction allows a very small bending radius as weil as excellent kinking behavior.