Slide flat valve soft sealing
Product information "Slide flat valve soft sealing"
| Casing: | GGG50 (EN-GJS-500-7) |
|---|---|
| Coating: | Epoxy coated, blue |
| Gasket: | NBR |
| Material: | NBR |
| Spindle: | stainless steel |
| DN | WP (bar) | weight (kg) | holes | overall length (mm) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|---|
| 50 | 16 | 8 | 4 | 150 | 8475050000 | ||
| 65 | 16 | 9 | 4 | 170 | 8475065000 | ||
| 80 | 16 | 11 | 8 | 180 | 8475080000 | ||
| 100 | 16 | 14 | 8 | 190 | 8475100000 | ||
| 125 | 16 | 22 | 8 | 200 | 8475125000 | ||
| 150 | 16 | 27 | 8 | 210 | 8475150000 | ||
| 200 | 16 | 50 | 8 | 230 | 8475200000 | ||
| 250 | 16 | 75 | 12 | 250 | 8475250000 | ||
| 300 | 16 | 97 | 12 | 270 | 8475300000 |
Last Seen
both sides female thread
all sides screw connection reduced
for PVC-U (hard). Surfaces must be cleaned with cleaner before bonding!
both sides male thread according to DIN 2982
3 x bonding socket, outlet in the middle reduced
one side screw connection, other side male thread
Das Kupplungensystem Perrot besteht aus einem M-Teil (Mutterteil) und einem V-Teil (Vaterteil). Das M-Teil besteht aus einem Becherteil mit einem Gummiring und einem hinter dem Becherteil befindlichen beweglichen Ring mit aufgesetztem Hebelwerk. Das Hebelwerk greift hinter den Pilzkopf des V-Teils, um dieses mit dem M-Teil fest zu verbinden. Durch die pilzförmige Bauweise lassen sich M- und V-Teil um bis zu 15° geneigt zusammenkuppeln. Um die exakte Größe der Kupplungen zu bestimmen, werden bei dem M-Teil der Innendurchmesser und bei dem V-Teil der Außendurchmesser gemessen. NW A (mm) B (mm) 50 / 2" 75,0 75,0 70 / 2 1/2" 98,0 102,5 89 / 3" 130,0 134,0 108 / 4" 145,5 155,5 133 / 5" 171,5 179,0 159 / 6" 203,5 211,0 216 / 8" 287,0 312,5
male thread x female thread, with reinforcement ring
PE 100 SDR 11 / 16 bar water, PE 100 SDR 17 / 10 bar water
injection moulding with hexagonal/octagonal connection x male thread
Customers Also Bought
with one bonding socket
for cleaning of bondig surfaces, for PVC-U (hard)
with hand wheel, for installation as an intermediate flange slider. Pipe passage tightness due to sealing on the narrow side of the plate. An adjustable transverse seal prevents the medium from escaping to the outside. Solid objects are sheared off by the cutting edge of the plate.
with hand wheel, for installation as an intermediate flange slider. Pipe passage tightness due to sealing on the narrow side of the plate. An adjustable transverse seal prevents the medium from escaping to the outside. Solid objects are sheared off by the cutting edge of the plate.