WEY knife gate valve type VNC with double-acting pneumatic drive
Product information "WEY knife gate valve type VNC with double-acting pneumatic drive"
| Casing: | GG 25 (EN-JL1040) |
|---|---|
| Coating: | EKB coating (Epoxy powder) |
| Cylinder: | aluminium |
| Gasket: | NBR |
| Spindle: | stainless steel 1.4104 |
| Valve plate: | stainless steel 1.4301 |
| DN | WP (bar) | overall length (mm) | weight (kg) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|
| 100 | 8 | 52 | 13 | 3180100000 | ||
| 150 | 10 | 56 | 26 | 3180150000 | ||
| 200 | 8 | 60 | 32 | 3180200000 | ||
| 250 | 6 | 68 | 46 | 3180250000 | ||
| 300 | 5 | 78 | 78 | 3180300000 |
Product data sheet
Last Seen
type Optima
without screws
suitable for suction of hot air and fumes, good resistance against chemicals. Very light, flexible and abrasion proof quality.
2 x rectangular flange with double-acting lever operation, for slurry flange gate valve with PVC flange adaptor, with male coupling system Perrot
for inclusion of couplings with smooth hose connections and safety collar, two-part, complete with hexagon socket screw and nut
both sides flanges PN 10/16 at DN 50 - DN 150 and PN 10 at DN 200, with hand wheel an not rising spindle according to DIN 3352, overall length according to F4
both sides flanges PN 10/16 at DN 50 - DN 150 and PN 10 at DN 200, with hand wheel an not rising spindle according to DIN 3352, overall length according to F4
type Optima
with pneumatic power, double-acting, for installation as an intermediate flange slider. Pipe passage tightness due to sealing on the narrow side of the plate. An adjustable transverse seal prevents the medium from escaping to the outside. Solid objects are sheared off by the cutting edge of the plate.
