Alu pressure coupling for clamping rings with short hose nozzle System Storz
Product information "Alu pressure coupling for clamping rings with short hose nozzle System Storz"
for the special integration of flat hoses with clamping rings, with short hose nozzle
| Gasket: | nitrile rubber |
|---|---|
| Material: | aluminium |
| NW | for hose (mm) | knag distance (mm) | Product Number | Delivery Time | |
|---|---|---|---|---|---|
| 52-C | 52 | 66 | 2140052000 | ||
| 65 | 65 | 81 | 2140065000 | ||
| 65 | 75 | 81 | 2140065075 | ||
| 75-B | 75 | 89 | 2140075000 | ||
| 90 | 90 | 105 | 2140090000 | ||
| 100 | 101,5 | 115 | 2140100000 | ||
| 110-A | 101,5 | 133 | 2140110000 | ||
| 110-A | 110 | 133 | 2140110100 | ||
| 110-A | 114 | 133 | 2140110114 | ||
| 110-A | 127 | 133 | 2140110127 | ||
| 125 | 127 | 148 | 2140125000 | ||
| 150 | 150 | 160 | 2140150000 |
Product data sheet
Skip product gallery
Coupling key für couplings System Storz 150-125
NW:
150 / 125
with cold protection lever
Product number:
2121150000
Coupling key für couplings System Storz B-C
NW:
75-B / 52-C
with cold protection lever
Product number:
2121075000
Coupling key für couplings System Storz A-B-C
NW:
110-A / 75-B / 52-C
with cold protection lever
Product number:
2121110001
Clamping rings for alu pressure coupling System Storz and System Perrot for clamping rings
three-part with screw and nut
Product number:
MASTER-2141
Skip product gallery
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
200
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329200000abs
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
152
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329152000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
45
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329045000abs
Pipe double nipple no. 23 galvanized
Male thread:
1 1/4"
|
length (mm):
40
both sides male thread according to DIN 2982
Product number:
3750032040
Reducing piece from female to male coupling System Perrot
NW:
female 133 x male 89
Product number:
2427133089
Hollow chamber packing profile
Length (m):
Abschnitt
for sealing the rear panel
Product number:
8390000000abs
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
75
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329075000
Male coupling with crimped hose nozzle System Perrot
NW:
89
|
for hose (mm):
76
Product number:
2415089076
Screw with nut
addition2:
6 x 20 mm
for couplings system, for installation on the outside of hose
Product number:
2132006020
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
100
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329100000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
250
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329250000abs
Pipe double nipple no. 23 galvanized
Male thread:
1"
|
length (mm):
150
both sides male thread according to DIN 2982
Product number:
3750025150
Brass hose connection with male coupling
for hose (mm) x male thread:
25 x 1“ mt
for shell-inclusion, smooth hose connection with safety collar and male thread
Product number:
2053025025
Female coupling with hose connection type C - System Kamlok PP
NW:
2"
with stainless steel lever
Product number:
2151050000
COBIPUR S - Heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
200
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, gravel, sand, glass. Especially suitable for suction dredgers. Very flexible special model for heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1330200000abs
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
140
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270140000
COBIIT PU - PVC/PU-suction- and pressure hose
Inner-Ø (mm):
76
|
Length (m):
30
especially suitable for the graveling and dewatering of flat roofs, suitable for grit, stones, sand, grain and other abrasive media. Robust and moveable quality.
Product number:
1328076000
Alu pressure coupling for clamping rings with short hose nozzle System Storz
NW:
110-A
|
for hose (mm):
127
for the special integration of flat hoses with clamping rings, with short hose nozzle
Product number:
2140110127
Brass hose connection with male coupling
for hose (mm) x male thread:
32 x 1 1/4“ mt
for shell-inclusion, smooth hose connection with safety collar and male thread
Product number:
2053032032
Pipe double nipple no. 23 galvanized
Male thread:
2"
|
length (mm):
100
both sides male thread according to DIN 2982
Product number:
3750050100
Pipe double nipple no. 23 galvanized
Male thread:
3"
|
length (mm):
100
both sides male thread according to DIN 2982
Product number:
3750075100
Brass sleeve ball valve type industry
female thread / male thread:
2"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3032050000
Alu pressure coupling for clamping rings with short hose nozzle System Storz
NW:
65
|
for hose (mm):
75
for the special integration of flat hoses with clamping rings, with short hose nozzle
Product number:
2140065075
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
180
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270180000
COBIPUR FLAT - Polyurethane flat hose
Inner-Ø (mm):
75
|
Length (m):
100
specially for slurry tubing between manure trailing hose applicator and container. High abrasion-and tension-proof flat hose. Suitable for conveying of abrasive media, sand, stones, grit, granulates, grain, good oil, chemical- and UV-resistance.
Product number:
1373075000
WEY knife gate valve type VNC with double-acting pneumatic drive
DN:
200
with pneumatic power, double-acting, for installation as an intermediate flange slider. Pipe passage tightness due to sealing on the narrow side of the plate. An adjustable transverse seal prevents the medium from escaping to the outside. Solid objects are sheared off by the cutting edge of the plate.
Product number:
3180200000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
60
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329060000abs
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
45
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329045000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
200
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329200000
WEY knife gate valve type VNB with hand lever
DN:
200
with manual lever, for installation as an intermediate flange slider. Pipe passage tightness due to sealing on the narrow side of the plate. An adjustable transverse seal prevents the medium from escaping to the outside. Solid objects are sheared off by the cutting edge of the plate.
Product number:
3185200000
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
160
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270160000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
70
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329070000abs
Female coupling for clamping rings with smooth hose nozzle System Bauer
NW:
108
|
for hose (mm):
100
for the special integration of flat hoses with clamping rings, with short hose nozzle
Product number:
2691108000
Alu fixed coupling with female thread Type I System Storz
NW:
52-C
|
Female thread:
1 1/4"
Product number:
2111052032
Female coupling with 4-corner flange System Perrot
NW:
159
with centric device groove for perfect distributor
Product number:
2428159150
Pipe double nipple no. 23 galvanized
Male thread:
1 1/4"
|
length (mm):
180
both sides male thread according to DIN 2982
Product number:
3750032180
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
63
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270063000
COBIPUR S - Heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
152
|
Length (m):
5
suitable for sharp-edged media, granulates, gravel, sand, glass. Especially suitable for suction dredgers. Very flexible special model for heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1330152005
Pipe double nipple no. 23 galvanized
Male thread:
3/4"
|
length (mm):
80
both sides male thread according to DIN 2982
Product number:
3750019080
COBIDUST L - Super lightweight polyurethane suction and blast hose, antistatic
Inner-Ø (mm):
90
|
Length (m):
10
for vapours, small industrial cleaning and suction plants. Can be used as protection sleeve. Suitable for suction of smoke and deciduous gases, dust suction of dry food according to EU 10/2011. Very light, flexible and abrasion-proof quality. Resistant to mineral oils, ageing, ozone and atmospherical agents, axially compressible about 5:1. Antistatic in accordance with TRBS 2153 by grounding the spiral. Not resistant to microbes and hydrolysis.
Product number:
1270090000
Brass quick coupling Y-piece System Geka
NW:
3/8" - 1 1/2"
suitable for all sizes 3/8“ - 1 1/2“
Product number:
3308000000
Pipe double nipple no. 23 galvanized
Male thread:
1 1/2"
|
length (mm):
40
both sides male thread according to DIN 2982
Product number:
3750038040
COBIPUR S - Heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
250
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, gravel, sand, glass. Especially suitable for suction dredgers. Very flexible special model for heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1330250000abs
COBISUPERFLEX - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
152
|
Length (m):
20
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality.
Product number:
1083152000
Skip product gallery
Clamping rings for alu pressure coupling System Storz and System Perrot for clamping rings
wall thickness (mm):
2,8 - 3,5
|
for hose (mm):
114
three-part with screw and nut
Product number:
2141114000
Clamping rings for alu pressure coupling System Storz and System Perrot for clamping rings
wall thickness (mm):
2,8 - 3,2
|
for hose (mm):
101,5
three-part with screw and nut
Product number:
2141100000
Alu pressure coupling for clamping rings with short hose nozzle System Storz
NW:
100
|
for hose (mm):
101,5
for the special integration of flat hoses with clamping rings, with short hose nozzle
Product number:
2140100000