Brass sleeve ball valve for potable water
Product information "Brass sleeve ball valve for potable water"
| Ball: | brass hard chromium-plated |
|---|---|
| Casing: | brass chromium-plated |
| Gasket: | PTFE |
| Handle: | steel, coated, green |
| Temperature range: | -20°C up to +150°C |
| female thread / male thread | WP (bar) | bore (mm) | overall length (mm) | thread length (mm) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|---|
| 1/4" | 50 | 8 | 56,9 | 11 | 3033006000 | ||
| 3/8" | 50 | 10 | 58,9 | 11,4 | 3033010000 | ||
| 1/2" | 50 | 15 | 68 | 15 | 3033013000 | ||
| 3/4" | 40 | 20 | 75,5 | 16,3 | 3033019000 | ||
| 1" | 40 | 25 | 90,5 | 19,1 | 3033025000 | ||
| 1 1/4" | 30 | 32 | 105 | 21,4 | 3033032000 | ||
| 1 1/2" | 30 | 40 | 115,5 | 21,4 | 3033038000 | ||
| 2" | 25 | 50 | 135,5 | 25,7 | 3033050000 |
Last Seen
without outlet both sides with flange DIN PN10 and hole distance 150 mm at 6“ and 180 mm at 8“
With a continuously welded spiral made of spring steel wire, corrosion-protected by PVC-coated polyester fabric. Equipped with spiral-free cuffs and tension straps on both ends. Specifically designed for construction heating, building drying, hot air, grain drying, drying technology, tent heating, mobile air conditioning units, and heating devices. Ideal blower hose for flexible applications. Features: Lightweight, highly flexible, tensile strength, kink-resistant, high compressibility, with abrasion protection on the spirals, spiral-free cuffs, and endless connection possible. Alternatives: Other sizes and lengths available. Optionally with end rings, zipper and Velcro fasteners, and flame-retardant!
both sides female thread with full bore, useable for not aggressive media
suitable for abrasive media, grain, cement, powder. Abrasion-proof rubber conveying hose.
one side screw connection, other side female thread
Customers Also Bought
wide-band clamp with rounded clamp band edgesScrew with a full bolt
short model, with welded on cardan bucket system Perrot and flange, lever mounted on the left, but can also be mounted on the right, V2A threaded spindle M10 at 6“, V2A threaded spindle M16 at 8“
norm 3S according to DIN 2605
suitable for water, waste water, sewage and low concentrated alkalis and acids. For agriculture, construction and industry. Very flexible, robust and buckling stabilized pressure hose.