COBIPUR M ETHER - Medium-heavy polyurethane suction hose, antistatic | 76,2 | 10 | meter

Product information "COBIPUR M ETHER - Medium-heavy polyurethane suction hose, antistatic"

Antistatic, medium-heavy ether-polyurethane suction hose with a reinforced stainless steel spiral (INOX AISI 302), highly flexible. Thanks to food-contact approval according to EU 10/2011 and FDA CFR 21-177.2600, this hose is ideally suited as a food hose or pharmaceutical hose for applications in the food, pharmaceutical, and plastics industries – especially for the suction of granulates and highly abrasive media. The COBIPUR M ETHER stands out for its very high abrasion resistance, its resistance to microbes and hydrolysis, and its excellent resistance to mineral oils, chemicals, UV radiation, ozone, and weathering. Despite its robustness, it is lightweight and extremely flexible even at low temperatures. Thanks to the completely smooth interior, excellent flow properties are achieved, while the constant wall thickness of 1.5 mm across all diameters ensures consistent quality and safety. The special TPU material makes the hose permanently antistatic and, if required, even conductive by earthing the spiral. Features: - Wall permanently antistatic (R < 10^9 Ohm/m) - Conductive (R < 10^2 Ohm/m) by earthing the spiral - Very high abrasion resistance - High flexibility, even at low temperatures - Very low weight with high mechanical strength - Resistant to microbes and hydrolysis - Good resistance to mineral oils and many chemicals - Resistant to ageing, UV radiation, ozone, and weathering

Certification:	Lebensmittelgeeignet gemäß EU 10/2011 (Klassen A, B, C, D1, D2, E), FDA-konform gemäß CFR 21-177.2600
Ohmic resistance:	Wandung permanent antistatisch (R < 10 hoch 9 Ohm/m), Leitfähig (R < 10 hoch 2 Ohm/m) durch Erdung der Spirale
Structure:	Ether-Polyurethan-Spiralschlauch mit fest eingegossenem Edelstahldraht (INOX AISI302), transparent, innen vollkommen glatt, außen gewellt, Wandmaterial permanent antistatisch (R, Ether-polyurethane spiral hose with firmly cast stainless steel wire (INOX AISI 302), transparent, completely smooth inside, corrugated outside, wall material permanently antistatic (R
Temperature range:	-40°C up to +90°C, for short time up to +125°C

Inner-Ø (mm)	Length (m)	Unit	bending radius (mm)	wall thickness (mm)	weight (g)	Unit	Vacuum (m WC)	Product Number
40	10	meter	90	1,5	425		9,5	1312040000
50,8	10	meter	90	1,5	590	meter	9	1312050000
60	10	meter	95	1,5	705	meter	9	1312060000
76,2	10	meter	110	1,5	965	meter	7	1312075000
80	10	meter	110	1,5	1010	meter	6	1312080000
100	10	meter	120	1,5	1155	meter	4	1312100000
127	10	meter	150	1,5	1380	meter	2,9	1312127000
152,4	10	meter	200	1,5	1850	meter	2	1312152000
203,2	10	meter	300	1,5	2770	meter	1,2	1312200000

Last Seen

m teil system perrot zum anschweissen mit hebelwerk und gummiring

Female coupling System Perrot

NW: 133

for weld on, with assembled lever arrangement and rubber ring

Product number: 2400133000

PE Elbow 45° PE100 / SDR11

d: 40

- For butt fusion and electrofusion welding- Long-arm version- 5 bar gas / 16 bar water

Product number: 4717040000

mz plattenschieber mit handrad ohne auslauf beidseitig mit flansch din pn sowie lochabstand mm bei und mm bei

MZ knife gate valve with hand wheel

DN: 150

without outlet both sides with flange DIN PN10 and hole distance 150 mm at 6" and 180 mm at 8"

Product number: 8018150000

PP end plug

d: 50

one side screw connection

Product number: 4661050000

cobirain l nitril flachschlauch leichte ausfuehrung beregnungsschlauch schwarz rolle

COBIRAIN L - Robust nitrile flat hose, lighter version

Inner-Ø (mm): 76 | Length (m): 200

optimal applicable for irrigation plants, industry and construction, oil-, fuel-resistant and resistant to diluted alkalis and diluted acids. High abrasion resistance due to longitudinal grooves in the outer cover. Universal flat hose with high tear resistance. Aging, UV and ozone resistant.

Product number: 1033075200

PE Elbow 45° PE100 / SDR17

d: 225

- For butt fusion and electrofusion welding- Long-arm version- 5 bar gas / 10 bar water

Product number: 4767225000

pvc t stueck grad mit klebemuffen und innengewinde

PVC T-fitting 90°

Female thread: 1/2" | d: 32

bonding socket x female thread x bonding socket without reinforcement ring

Product number: 4221032013

PE Elbow 90° PE100 / SDR11

d: 280

- For butt fusion and electrofusion welding- Long-arm version- 5 bar gas / 16 bar water- The fittings are manufactured by injection moulding- Radius 1 x d

Product number: 4719280000