COBISUPERELASTIC - High-flexible PVC suction and pressure hose
Product information "COBISUPERELASTIC - High-flexible PVC suction and pressure hose"
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality. Outer cover particularly protected against abrasion by increased external spiral.
| Colour: | grey |
|---|---|
| Safety: | 3:1 |
| Structure: | synthetic spiral hose, silver-grey, PVC-Buna mixture, with hard PVC spiral, inside smooth, outside corrugated |
| Temperature range: | -20°C up to +60°C |
| Inner-Ø (mm) | Length (m) | Unit | Vacuum (m WC) | wall thickness (mm) | WP (bar) | bending radius (mm) | Outer-Ø (mm) | weight (g) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 51 | 50 | meter | 9 | 5,4 | 5 | 153 | 61,8 | 1070 | 1086051000 | ||
| 63 | 50 | meter | 9 | 6 | 4,5 | 220 | 75 | 1400 | 1086063000 | ||
| 76 | 50 | meter | 9 | 6,5 | 4 | 266 | 89 | 1720 | 1086076000 | ||
| 80 | 50 | meter | 9 | 6,5 | 4 | 280 | 93 | 1900 | 1086080000 | ||
| 102 | 50 | meter | 9 | 8 | 3 | 357 | 118 | 2700 | 1086102000 |
Product data sheet
Skip product gallery
Tension jaw clamps W4
Clamping range (mm):
85-91
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1531085091
Female coupling with crimped hose nozzle System Perrot
NW:
89
|
for hose (mm):
76
Product number:
2410089076
Hose clamp two part M 2
Clamping range (mm):
80-90
two part wide-band clamp to clamping range 60-70 mm screw M6 x 45 from clamping range 65-75 mm screw M8 x 60
Product number:
1540080090
Alu suction coupling with hose nozzle with sawtooth Typ I System Storz
NW:
75-B
|
for hose (mm):
76
Product number:
2113075076
Alu suction coupling with hose nozzle with sawtooth System Storz
NW:
75-B
|
for hose (mm):
76
Product number:
2103075076
Male coupling with crimped hose nozzle System Perrot
NW:
89
|
for hose (mm):
76
Product number:
2415089076
COBI Tension jaw clamps W1
Clamping range (mm):
86-91
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521086091
Skip product gallery
Brass sleeve ball valve for potable water
Female thread:
3/8"
both sides female thread
with full bore, useable for potable water according to DIN EN 13828 and DVGW-W 570
Product number:
3038010000
COBISUPERELASTIC - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
76
|
Length (m):
50
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality. Outer cover particularly protected against abrasion by increased external spiral.
Product number:
1086076000
Brass sleeve ball valve for gas
female thread / male thread:
1/2"
one side femal thread, other side male thread
with full bore, useable for gas according to DIN EN 10226-1 and DVGW-certification. PN 5 for gas, PN 25-50 for other media
Product number:
3036013000
Stainless steel screw union
Female thread:
3/4"
both sides female thread, conical sealing
Product number:
5095019000
COBIKASPI PLUS - Cassettes boom hose, very flexible
Inner-Ø (mm):
110/100
|
Length (m):
20
for all standard sewer cleaning vehicles for suction of waste water, waste and residues from the sewer. Resistant to traces of oil. Very flexible even at low temperatures and thus offers optimum running properties within the cassette of a sewer cleaning vehicle. Conductive and very resistant to abrasion.
Product number:
1430100000
PVC elbow 90°
Female thread:
2 1/2"
|
d:
75
bonding socket x female thread with reinforcement ring
Product number:
4180075063
Food coupling with male thread
NW coupling x for hose (mm):
DN100 x 100 mm
for shell-inclusion with safety collar
Product number:
2715100000
Pipe double nipple no. 23 galvanized
Male thread:
3/4"
|
length (mm):
150
both sides male thread according to DIN 2982
Product number:
3750019150
Pipe double nipple no. 23 galvanized
Male thread:
2"
|
length (mm):
80
both sides male thread according to DIN 2982
Product number:
3750050080
Pipe double nipple no. 23 galvanized
Male thread:
1/2"
|
length (mm):
200
both sides male thread according to DIN 2982
Product number:
3750013200
MZ knife gate valve with double acting hydraulic cylinder
DN:
250
without outlet both sides with flange DIN PN10 and hole distance 150 mm at 6“ and 180 mm at 8“
Product number:
8217250000
Brass sleeve ball valve for gas
Female thread:
1 1/4"
both sides female thread
with full bore, useable for gas according to DIN EN 10226-1 and DVGW-certification. PN 5 for gas, PN 25-50 for other media
Product number:
3037032000
Manometer 50 mm housing for pressure regulator, connection 1/4" male thread rear
indicating range (bar):
0/+10
Bourdon tube pressure gauge for liquid and gaseous media, type dry.
Product number:
3250006000
Pipe double nipple no. 23 galvanized
Male thread:
1 1/4"
|
length (mm):
100
both sides male thread according to DIN 2982
Product number:
3750032100
COBILIGHT SE - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
40
|
Length (m):
50
specially as a drip hose for liquid manure distribution. Super flexible and cold-resistant quality. UV and weather resistant.
Product number:
1061040000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
110
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329110000abs
Male stem adaptor with taper thread Speedfit
d:
15
brass, suitable for central heating systems
Product number:
4918015013
Hose connection fitting with male thread
for hose (mm):
90
mounting on hose outside
Product number:
2475108100
Male stem adaptor with taper thread Speedfit
d:
22
brass, suitable for central heating systems
Product number:
4918015019
COBIVIN - PVC suction and pressure hose with steel wire spiral
Inner-Ø (mm):
20
|
Length (m):
50
for water, waste water, food, alcohol up to 20%, sewage, for groundwater lowering and machine construction also for agriculture and construction suitable. Also useable for hydraulic return lines.
Product number:
1070020000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
40
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329040000abs
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
75
|
Length (m):
Abschnitt
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications.
Can be used as a lightweight, highly flexible feeder hose.
Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329075000abs
Glycerin-filled manometer 63 mm housing, connection 1/4" male thread bottom
indicating range (bar):
0/+2,5
Bourdon tube pressure gauge for liquid and gaseous media, filled with glycerin.
Product number:
8128006002
COBIKANTEX 250 - Rubber sewer cleaning hose 250 bar
Inner-Ø (mm):
19
|
Length (m):
120
lightweight, high flexible and extremely abrasion-resistant rubber sewer cleaning hose. The light weight and low bending radius allow extremely easy handling. The external cover is smooth and very resistant to abrasion and to oil and weathering effects. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1481019120
Brass sleeve ball valve for potable water
Female thread:
3/4"
both sides female thread
with full bore, useable for potable water according to DIN EN 13828 and DVGW-W 570
Product number:
3038019000
COBIKANTEX 250 - Rubber sewer cleaning hose 250 bar
Inner-Ø (mm):
32
|
Length (m):
10
lightweight, high flexible and extremely abrasion-resistant rubber sewer cleaning hose. The light weight and low bending radius allow extremely easy handling. The external cover is smooth and very resistant to abrasion and to oil and weathering effects. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1481032010
Pipe double nipple no. 23 galvanized
Male thread:
3/8"
|
length (mm):
100
both sides male thread according to DIN 2982
Product number:
3750010100
Brass sleeve ball valve for potable water
Female thread:
1 1/2"
both sides female thread
with full bore, useable for potable water according to DIN EN 13828 and DVGW-W 570
Product number:
3038038000
Alu fixed coupling with male thread Type I System Storz
NW:
25-D
|
Male thread:
1"
Product number:
2112025025
COBISUPERFLEX - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
76
|
Length (m):
Abschnitt
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality.
Product number:
1083076000abs
COBIROKAN - Rubber tube cleaning hose 200 bar
Inner-Ø (mm):
12,7
|
Length (m):
120
light, abrasion-resistant and highly flexible rubber pipe cleaning hose ideal for cleaning narrow house connections. Also used as an inlet hose for camera TV inspection. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1484012120
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
76
|
Length (m):
Abschnitt
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082076000abs
Brass sleeve ball valve type COBI with drain valve
Female thread:
1 1/4"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3034032000
Brass sleeve ball valve type COBI with drain valve
Female thread:
2"
both sides female thread
with full bore, useable for not aggressive media
Product number:
3034050000
COBIPOLYKAN 200 - Synthetic sewer cleaning hose 200 bar
Inner-Ø (mm):
25,2
|
Length (m):
160
highly abrasion-resistant, buoyant, cut resistant and very flexible. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1485025160
Concentric welding reducing piece
Outer-Ø (mm):
219,1 x 6,3 / 159,0 x 4,5
Product number:
2335219159
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
76
|
Length (m):
50
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082076050
Brass sleeve ball valve for potable water
Female thread:
2"
both sides female thread
with full bore, useable for potable water according to DIN EN 13828 and DVGW-W 570
Product number:
3038050000
COBIVIN - PVC suction and pressure hose with steel wire spiral
Inner-Ø (mm):
60
|
Length (m):
50
for water, waste water, food, alcohol up to 20%, sewage, for groundwater lowering and machine construction also for agriculture and construction suitable. Also useable for hydraulic return lines.
Product number:
1070060000
Skip product gallery
TW clamping ring with lever made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
50
for connecting the sealing ring piece with the curve piece
Product number:
2003050000
TW clamping ring with lever made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
80
for connecting the sealing ring piece with the curve piece
Product number:
2003080000
TW sealing ring piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
50 x 2" IG
with female thread
Product number:
2002050000
Hose clamp two part M 2
Clamping range (mm):
80-90
two part wide-band clamp to clamping range 60-70 mm screw M6 x 45 from clamping range 65-75 mm screw M8 x 60
Product number:
1540080090
TW curve piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
80 x 3" IG
with female thread
Product number:
2001080000
Boiler-pipe bend 90° Norm 3S
Outer-Ø (mm):
76,1
norm 3S according to DIN 2605
Product number:
2320076000
TW curve piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
50 x 2" IG
with female thread
Product number:
2001050000
Malleable cast iron Reducing nipple no. 241
male thread / female thread:
3" x 2"
one side male thread, other side female thread
Product number:
3724075050
Brass hose connection with male coupling
for hose (mm) x male thread:
50 x 2“ mt
for clamp-inclusion, corrugated hose connection with male thread
Product number:
2051050050
TW sealing ring piece made of brass according to DIN EN 14420-6 (DIN 28450)
NW:
80 x 3" IG
with female thread
Product number:
2002080000