Tension jaw clamps W4
Product information "Tension jaw clamps W4"
wide-band clamp with open able bridge piece and with rounded clamp band edges
| Material: | Band/housing: stainless steel V2A 1.4301, AISI 304 Screw: with hexagon, stainless steel V2A 1.4301, AISI 304 |
|---|
| Clamping range (mm) | Unit | Packing unit (piece) | Band width (mm) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|
| 17-19 | piece | 50 | 18 | 1531017019 | ||
| 19-21 | piece | 50 | 18 | 1531019021 | ||
| 21-23 | piece | 50 | 18 | 1531021023 | ||
| 23-25 | piece | 50 | 18 | 1531023025 | ||
| 25-27 | piece | 50 | 18 | 1531025027 | ||
| 27-29 | piece | 50 | 18 | 1531027029 | ||
| 29-31 | piece | 50 | 20 | 1531029031 | ||
| 31-34 | piece | 50 | 20 | 1531031034 | ||
| 34-37 | piece | 50 | 20 | 1531034037 | ||
| 37-40 | piece | 50 | 20 | 1531037040 | ||
| 40-43 | piece | 50 | 20 | 1531040043 | ||
| 44-47 | piece | 50 | 20 | 1531044047 | ||
| 47-51 | piece | 50 | 20 | 1531047051 | ||
| 51-55 | piece | 25 | 20 | 1531051055 | ||
| 56-59 | piece | 25 | 20 | 1531056059 | ||
| 60-63 | piece | 25 | 20 | 1531060063 | ||
| 63-68 | piece | 25 | 20 | 1531063068 | ||
| 68-73 | piece | 25 | 25 | 1531068073 | ||
| 73-79 | piece | 25 | 25 | 1531073079 | ||
| 79-85 | piece | 25 | 25 | 1531079085 | ||
| 85-91 | piece | 25 | 25 | 1531085091 | ||
| 92-97 | piece | 25 | 25 | 1531092097 | ||
| 97-102 | piece | 25 | 25 | 1531097102 | ||
| 104-112 | piece | 25 | 25 | 1531104112 | ||
| 112-121 | piece | 25 | 25 | 1531112121 | ||
| 121-130 | piece | 25 | 25 | 1531121130 | ||
| 130-140 | piece | 10 | 26 | 1531130140 | ||
| 140-150 | piece | 10 | 26 | 1531140150 | ||
| 150-162 | piece | 10 | 26 | 1531150162 | ||
| 162-174 | piece | 10 | 26 | 1531162174 | ||
| 174-187 | piece | 10 | 26 | 1531174187 | ||
| 187-200 | piece | 10 | 26 | 1531187200 | ||
| 200-213 | piece | 10 | 26 | 1531200213 | ||
| 213-226 | piece | 10 | 26 | 1531213226 | ||
| 226-239 | piece | 10 | 26 | 1531226239 | ||
| 239-252 | piece | 10 | 26 | 1531239252 |
Product data sheet
Skip product gallery
COBI Tension jaw clamps W1
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
MASTER-1521
Tension jaw clamps W2
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
MASTER-1525
Skip product gallery
COBILIGHT L2 - PVC suction and pressure hose for liquids
Inner-Ø (mm):
100
for beer, wine, mash, fruit juices, mineral water, spirits with 50% alcohol, milk, vinegar, foods and beverages, water, liquid fertilizer, agriculture, industry.
Product number:
1079100000
COBIORPU AS - Polyurethane exhaust ventilation hose, antistatic
Inner-Ø (mm):
76
|
Length (m):
30
suitable for powder, grain mixture, wood shaving, dust, isolating materials, grass and deciduous exhaust ventilation, food and chemicals. Very moveable and abrasion-proof PU hose for light applications. Microbes and hydrolysis resistant. Antistatic thanks to revolving cooper braid.
Product number:
1341076000
Alu fixed coupling with male thread Type I System Storz
NW:
75-B
|
Male thread:
3"
Product number:
2112075075
COBIPUR S - Heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
75
|
Length (m):
10
suitable for sharp-edged media, granulates, gravel, sand, glass. Especially suitable for suction dredgers. Very flexible special model for heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1330075000
HDPE-quick coupling pipes System Bauer
NW:
108
|
Length (m):
6
one side female coupling, other side male coupling, with 1 clamp each side
Product number:
2454108106
Female coupling with hose nozzle System Bauer
NW:
89
|
for hose (mm):
75
with lever arrangement
Product number:
2606089075
COBIVIN - PVC suction and pressure hose with steel wire spiral
Inner-Ø (mm):
76
|
Length (m):
Abschnitt
for water, waste water, food, alcohol up to 20%, sewage, for groundwater lowering and machine construction also for agriculture and construction suitable. Also useable for hydraulic return lines.
Product number:
1070076000abs
Perfect distributor
NW:
108
with female coupling system Perrot and rubber nozzle, tension jaw clamp and perfect baffle plate
Product number:
8413108000
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
38
|
Length (m):
Abschnitt
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082038000abs
PVC fixed flange
DN:
65
|
Female thread:
2 1/2"
PN 10-16 with female thread
Product number:
4402063000
COBI Tension jaw clamps W1
Clamping range (mm):
201-213
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521201213
Male coupling with male thread System Bauer
NW:
133
|
Male thread:
5"
with rubber ring
Product number:
2609133125
PE T-piece 45° SDR 17
addition2:
from pipe
|
d:
200
PE 100 SDR 17 / 5 bar gas / 10 bar water
Product number:
4787200001
COBISUPER PU - PVC/PU suction and pressure hose for middle heavy applications
Inner-Ø (mm):
90
|
Length (m):
30
suitable for grain, powder, grinding and mixing plants. Very flexible and abrasion-proof PVC suction and pressure hose with internal polyurethane coat and internal copper braid.
Product number:
1324090000
COBIPUR M - Middle heavy polyurethane suction and conveying hose, antistatic
Inner-Ø (mm):
250
|
Length (m):
10
suitable for sharp-edged media, granulates, grit, sand, grain, powder and gases. Special model for middle heavy applications. Not resistant to microbes and hydrolysis. Good resistance to oil, gasoline and chemicals.
Product number:
1329250000
COBIKANTEX 250 - Rubber sewer cleaning hose 250 bar
Inner-Ø (mm):
32
|
Length (m):
40
lightweight, high flexible and extremely abrasion-resistant rubber sewer cleaning hose. The light weight and low bending radius allow extremely easy handling. The external cover is smooth and very resistant to abrasion and to oil and weathering effects. Pressed with fittings on the one side AGR (MT) on the other side DKR (FT).
Product number:
1481032040
PP clamp saddle
Female thread:
1 1/4"
|
d:
63
with reinforcement ring and female thread, anti-rotation system for PE pipes, flat gasket
Product number:
4456063032
Malleable cast iron Reducing nipple no. 241
male thread / female thread:
2" x 1 1/4"
one side male thread, other side female thread
Product number:
3724050032
Alu fixed coupling with female thread System Storz with locking device
NW:
150
|
Female thread:
6"
With extra locking to prevent unintentional opening.
Product number:
2781150150
Malleable cast iron Sleeve no. 270
Female thread:
3"
both sides female thread
Product number:
3727075000
Male coupling with hose connection type E - System Kamlok Aluminium Make LMC
NW:
4"
Product number:
2182100000
COBIORPU AS - Polyurethane exhaust ventilation hose, antistatic
Inner-Ø (mm):
100
|
Length (m):
20
suitable for powder, grain mixture, wood shaving, dust, isolating materials, grass and deciduous exhaust ventilation, food and chemicals. Very moveable and abrasion-proof PU hose for light applications. Microbes and hydrolysis resistant. Antistatic thanks to revolving cooper braid.
Product number:
1341100000
Male coupling with hose nozzle System Bauer
NW:
159
|
for hose (mm):
150
with rubber ring
Product number:
2607159150
Tip
COBIDRUCK - Rubber spiral suction and pressure hose 10 bar
Inner-Ø (mm):
152
|
Length (m):
Abschnitt
suitable for agriculture, construction trade and industry. Suitable for water, waste water, sewage and low concentrated alkalis and acids. Robust and kink resistant rubber suction and pressure hose.
Product number:
1050152000abs
Malleable cast iron Elbow connector no. 221
Female thread:
1/2"
all sides female thread
Product number:
3721013000
PVC Elbow 90° (Typ COBI)
Female thread:
3/8"
|
d:
16
bonding socket x female thread without reinforcement ring
Product number:
4175016010
Malleable cast iron Reducing sleeve no. 240
Female thread:
1 1/4" x 1/2"
both sides female thread
Product number:
3723032013
Brass suction hose connection with male thread
for hose (mm) x male thread:
25 x 3/4“ mt
useable for clamp-inclusion, corrugated hose connection with male thread, hexagon collar, flat sealing
Product number:
3330019025
PP clamp saddle
Female thread:
1"
|
d:
75
with reinforcement ring and female thread, anti-rotation system for PE pipes, flat gasket
Product number:
4456075025
COBIVIN - PVC suction and pressure hose with steel wire spiral
Inner-Ø (mm):
18
|
Length (m):
Abschnitt
for water, waste water, food, alcohol up to 20%, sewage, for groundwater lowering and machine construction also for agriculture and construction suitable. Also useable for hydraulic return lines.
Product number:
1070018000abs
COBIOIL K - Oil- and petrol-resistant PVC suction and pressure hose
Inner-Ø (mm):
102
|
Length (m):
Abschnitt
suitable for loading and unloading tank trucks, for passing gasoline, petroleum, heating oil and mineral oils.
Product number:
1419102000abs
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
90
|
Length (m):
4
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082090042
Skip product gallery
Tension jaw clamps W4
Clamping range (mm):
56-59
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1531056059
Alu fixed coupling with female thread, moveable System Storz
NW:
52-C
|
Female thread:
2"
Product number:
2116052050
TW curve piece made of stainless steel according to DIN EN 14420-6 (DIN 28450)
NW:
80 x 3" IG
with female thread
Product number:
2012080000
Stainless steel hose nozzle with male thread
for hose (mm) x male thread:
50,8 x 2“ mt
for monting with clamps for, grooved hose nozzle with external thread
Product number:
5090050000
Alu suction coupling with hose nozzle System Storz
NW:
52-C
|
for hose (mm):
50
Product number:
2103052050
TW cap made of stainless steel according to DIN EN 14420-6 (DIN 28450)
NW:
80
Tankwagenkupplung-Blindkappe zum Verschließen des TW-Kurzenstück (VK)
Product number:
2015080000
Tension jaw clamps W4
Clamping range (mm):
63-68
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1531063068
COBIVIN - PVC suction and pressure hose with steel wire spiral
Inner-Ø (mm):
50
|
Length (m):
Abschnitt
for water, waste water, food, alcohol up to 20%, sewage, for groundwater lowering and machine construction also for agriculture and construction suitable. Also useable for hydraulic return lines.
Product number:
1070050000abs
Tangit special cement
addition2:
tin 500 g
for PVC-U (hard). Surfaces must be cleaned with cleaner before bonding!
Product number:
4095000500