Tension jaw clamps W2
Product information "Tension jaw clamps W2"
wide-band clamp with open able bridge piece and with rounded clamp band edges
| Material: | Band/housing: rust-free steel 1.4510, AISI 430 Screw: with hexagon, steel 8.8, galvanized |
|---|
| Clamping range (mm) | Unit | Packing unit (piece) | Band width (mm) | Product Number | Delivery Time | |
|---|---|---|---|---|---|---|
| 17-19 | piece | 50 | 18 | 1525017019 | ||
| 19-21 | piece | 50 | 18 | 1525019021 | ||
| 21-23 | piece | 50 | 18 | 1525021023 | ||
| 23-25 | piece | 50 | 18 | 1525023025 | ||
| 25-27 | piece | 50 | 18 | 1525025027 | ||
| 27-29 | piece | 50 | 18 | 1525027029 | ||
| 29-31 | piece | 50 | 20 | 1525029031 | ||
| 31-34 | piece | 50 | 20 | 1525031034 | ||
| 34-37 | piece | 50 | 20 | 1525034037 | ||
| 37-40 | piece | 50 | 20 | 1525037040 | ||
| 40-43 | piece | 50 | 22 | 1525040043 | ||
| 43-47 | piece | 50 | 22 | 1525043047 | ||
| 47-51 | piece | 50 | 22 | 1525047051 | ||
| 51-55 | piece | 25 | 22 | 1525051055 | ||
| 55-59 | piece | 25 | 22 | 1525055059 | ||
| 59-63 | piece | 25 | 22 | 1525059063 | ||
| 63-68 | piece | 25 | 24 | 1525063068 | ||
| 68-73 | piece | 25 | 24 | 1525068073 | ||
| 73-79 | piece | 25 | 24 | 1525073079 | ||
| 79-85 | piece | 25 | 24 | 1525079085 | ||
| 85-91 | piece | 25 | 24 | 1525085091 | ||
| 91-97 | piece | 25 | 24 | 1525091097 | ||
| 97-104 | piece | 25 | 24 | 1525097104 | ||
| 104-112 | piece | 25 | 24 | 1525104112 | ||
| 112-121 | piece | 25 | 24 | 1525112121 | ||
| 121-130 | piece | 25 | 24 | 1525121130 | ||
| 130-140 | piece | 10 | 26 | 1525130140 | ||
| 140-150 | piece | 10 | 26 | 1525140150 | ||
| 150-162 | piece | 10 | 26 | 1525150162 | ||
| 162-174 | piece | 10 | 26 | 1525162174 | ||
| 174-187 | piece | 10 | 26 | 1525174187 | ||
| 187-200 | 10 | 26 | 1525187200 | |||
| 200-213 | piece | 10 | 26 | 1525200213 | ||
| 213-226 | piece | 10 | 26 | 1525213226 |
Product data sheet
Skip product gallery
Tension jaw clamps W4
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
MASTER-1531
COBI Tension jaw clamps W1
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
MASTER-1521
Skip product gallery
Flange ball valve for Gas
DN:
80
with full bore, overall length according to DIN 3202 F4, DIN 3202 F5
Product number:
3064080000
COBITROM PLUS - Special silo conveying hose
wall thickness (mm):
9
|
Inner-Ø (mm):
75
|
Length (m):
40
suitable for abrasive media, grain, cement, powder. Abrasion-proof rubber conveying hose.
Product number:
1321075000
Brass bibcock ball valve
Male thread:
3/4"
with hose screw connection, useable for not aggressive media
Product number:
3090019000
Steam hose fitting with safety collar according to EN 14423 with male thread, made of brass
for hose (mm) x male thread:
19 x 3/4“ mt
Ribbed hose nipple with safety collar for clamp shell assembly, suitable for steam hose installation, heavy-duty version
Product number:
2055019000
Malleable cast iron Elbow 90° Nr. 90
Female thread:
3"
both sides female thread
Product number:
3709075000
COBIPRESS - Compressed air hose 10 bar
Inner-Ø (mm):
19
|
Length (m):
20
suitable for air containing lubricants and oil mist
Product number:
1217019020
Brass non-return valve
Female thread:
1 1/4"
both sides female thread, with spring loaded tape up to 1” open pressure 0,1 bar and by 2” open pressure 0,2 bar
Product number:
3220032000
COBIFLAT M - Middle-heavy PVC flat hose
Inner-Ø (mm):
127
|
Length (m):
100
Universally applicable medium-heavy flat hose for construction, industry and agriculture. Ideally suited as a pressure hose for irrigation. As an inlet and outlet hose for water and other media, can be rolled up flat. Robust and durable quality.
Product number:
1031127000
Malleable cast iron Sleeve no. 270
Female thread:
1 1/2"
both sides female thread
Product number:
3727038000
Brass bibcock ball valve
Male thread:
1"
with hose screw connection, useable for not aggressive media
Product number:
3090025000
Brass bibcock ball valve
Male thread:
1/2"
with hose screw connection, useable for not aggressive media
Product number:
3090013000
Hose clamps DIN 20039 A
Clamping range (mm):
20-29
two part, loose tongues.
Product number:
1560020029
Trelleborg Citerdial - Milk handling hose
Inner-Ø (mm):
32
|
Length (m):
Abschnitt
for milk tankers. For unloading of milk in dairies and stationary filling equipment. Also for transport of other liquid foodstuffs such as wine, beer, cider, fruit juice, vinegar and alcohol up to 96%.
Product number:
1114032000abs
Brass sleeve swing check valve
Female thread:
6"
both sides female thread, metallic sealing
Product number:
3225150000
Stainless steel fixed coupling with female thread System Storz
NW:
75-B
|
Female thread:
2 1/2"
Product number:
2107075063
Maßtabelle italienisches Kupplungssystem
Das italienische Kupplungensystem besteht aus einer MT-Kupplung und einer M-Kupplung. Bei der MT-Kupplung ist das Hebelwerk fest angeschweißt. Die M-Kupplung besteht aus einer Kugel woran sich ein loser Spannring befindet, in den das Hebelwerk der MT-Kupplung eingerastet wird. Um die exakte Größe der Kupplungen zu bestimmen, werden bei der MT-Kupplung der Innendurchmesser und bei der M-Kupplung der Außendurchmesser gemessen.
NW
A (mm)
B (mm)
80 / 3"
110
111
100 / 4"
132
130
120 / 5"
151
150
150 / 6"
180
180
200 / 8"
245
243
250 / 10"
301
300
Product number:
Italienisches_System
Pipe coupling elbow 90° with female thread
d:
40
one side female thread, other side screw connection
Product number:
3457040032
Tension jaw clamps W2
Clamping range (mm):
25-27
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1525025027
Pipe double nipple no. 23 galvanized
Male thread:
1 1/2"
|
length (mm):
180
both sides male thread according to DIN 2982
Product number:
3750038180
MZ knife gate valve with double acting hydraulic cylinder
DN:
200
without outlet both sides with flange DIN PN10 and hole distance 150 mm at 6“ and 180 mm at 8“
Product number:
8217200000
Female coupling with male thread type B - System Kamlok stainless steel
NW:
1 1/2"
with stainless steel lever
Product number:
2175038000
Malleable cast iron Double nipple no. 280
Male thread:
1/8"
both sides male thread
Product number:
3729003000
COBIWATER PLUS - EPDM-waterhose, multipurpose hose 20 bar
Inner-Ø (mm):
32
|
Length (m):
50
highly flexible service water hose for cold and hot water for particularly high requirements. Resistant to chemicals with low aggressiveness. Aging and weather resistant.
Product number:
1006032000
Malleable cast iron Double nipple no. 280
Male thread:
1 1/4"
both sides male thread
Product number:
3729032000
Hose clamps DIN 20039 B
Clamping range (mm):
22-29
two part, loose tongues and backupclaws.
Product number:
1561022029
Brass bibcock ball valve
Male thread:
1/2"
with hose screw connection, useable for not aggressive media
Product number:
3092013000
Female coupling System Perrot
NW:
108
for weld on, with assembled lever arrangement and rubber ring
Product number:
2400108000
Brass sleeve ball valve type COBI with butterfly handle
female thread / male thread:
3/8"
one side female thread, other side male thread
with full bore, useable for not aggressive media
Product number:
3055010000
Female coupling with male thread type B - System Kamlok Aluminium
NW:
1"
with stainless steel lever
Product number:
2165025000
Trelleborg Citerdial - Milk handling hose
Inner-Ø (mm):
38
|
Length (m):
40
for milk tankers. For unloading of milk in dairies and stationary filling equipment. Also for transport of other liquid foodstuffs such as wine, beer, cider, fruit juice, vinegar and alcohol up to 96%.
Product number:
1114038000
Tension jaw clamps W2
Clamping range (mm):
40-43
wide-band clamp with open able bridge piece and with rounded clamp band edges
Product number:
1525040043
COBIDUST STEAM - High temperature exhaust ventilation hose
Inner-Ø (mm):
51
|
Length (m):
20
suitable for suction of hot air and fumes, good resistance against chemicals. Very light, flexible and abrasion proof quality.
Product number:
1278051000
COBIFLAT M - Middle-heavy PVC flat hose
Inner-Ø (mm):
127
|
Length (m):
Abschnitt
Universally applicable medium-heavy flat hose for construction, industry and agriculture. Ideally suited as a pressure hose for irrigation. As an inlet and outlet hose for water and other media, can be rolled up flat. Robust and durable quality.
Product number:
1031127000abs
Slide flat valve soft sealing
DN:
50
both sides flanges PN 10, with hand wheel and not rising spindle, overall length according to F4
Product number:
8475050000
Stainless steel clamping shells EN 14420-3
for hose x wall thickness (mm):
19 x 6
for inclusion of couplings with smooth hose connections and safety collar, two-part, complete with hexagon socket screw and nut
Product number:
2072019006
Male coupling with male thread italian coupling system
NW:
150
|
Male thread:
2 1/2"
Product number:
8305150063
COBIDUST KK - PVC suction and blast hose
Inner-Ø (mm):
20
|
Length (m):
30
suitable for suction of air, fumes, gas, powders, sawing, dust. For aerating and conditioning plants, wood working plants, for agriculture as drill machine hose, for conveying of gaseous media. Very light and flexible quality. Resistant to atmospheric influences and chemical substances.
Product number:
1263020000
Female coupling with male thread type B - System Kamlok stainless steel
NW:
3/4"
with stainless steel lever
Product number:
2175019000
Hose clamps 2-ear-clamps
Clamping range (mm):
20-23
suitable for easy assembling with a pliers
Product number:
1555020023
Skip product gallery
COBIDRUCK LIGHTFLEX GR - Ribbed rubber spiral suction and pressure hose 6 bar, high flexible
Inner-Ø (mm):
152
|
Length (m):
20
suitable for water, waste water, sewage and low concentrated alkalis and acids. For agriculture, construction and industry. Very flexible, robust and buckling stabilized pressure hose.
Product number:
1026152000
Male coupling with crimped hose nozzle System Perrot
NW:
159
|
for hose (mm):
152
Product number:
2415159152
COBICREA - Slurry hose, High-flexible PVC suction and pressure hose
Inner-Ø (mm):
152
|
Length (m):
5
suitable for water, sewage and faeces. Ideal for use as a PVC suction hose and extension hose for liquid manure. For irrigation, agriculture, construction and industry. Highly flexible and cold-resistant quality.
Product number:
1082152005
Female coupling with crimped hose nozzle System Perrot
NW:
159
|
for hose (mm):
152
Product number:
2410159152
COBI Tension jaw clamps W1
Clamping range (mm):
162-174
wide-band clamp with rounded clamp band edgesScrew with a full bolt
Product number:
1521162174
Suction quick coupler
NW:
159
short model, with welded on cardan bucket system Perrot and flange, lever mounted on the left, but can also be mounted on the right, galvanezed threaded spindle M10
Product number:
8463159150
COBISUPERFLEX - High-flexible PVC suction and pressure hose
Inner-Ø (mm):
152
|
Length (m):
20
suitable for municipal vehicles, irrigation and agriculture. High-flexible and cold-resistant quality.
Product number:
1083152000